Install the device into the chassis.

Note You must install the software before you install the hardware.
  1. Power off and unplug the chassis.
    Refer to your chassis manual to install or configure the chassis.
  2. Identify a supported module slot in the chassis. The figure below shows the symbols that indicate the slot types in the chassis.
    Figure 2. Symbols for Module Slots

    Chassis Slot Symbols for Module Installation

    1. PXI Express System Controller Slot
    2. PXI Peripheral Slot
    3. PXI Express Hybrid Peripheral Slot
    4. PXI Express System Timing Slot
    5. PXI Express Peripheral Slot
    PXI Express devices can be placed only in PXI Express slots and PXIe Express Hybrid slots. Refer to the chassis documentation for details.
  3. Remove the filler panel of an unused module slot.
  4. Touch any metal part of the chassis to discharge any static electricity. Place the module edges into the module guides at the top and bottom of the chassis, and slide the module into the chassis until the module is fully inserted.
  5. Secure the device front panel to the chassis front panel mounting rail using the front panel mounting screws.
  6. Plug in and power on the chassis.