Making a Measurement with InstrumentStudio
- Updated2025-11-26
- 1 minute(s) read
- Connect CH 0 to an input signal.
- Search your computer for and launch InstrumentStudio.
-
In the instrument header menu in the upper-right corner of the panel (
), add the PXIe-5108 to the large panel with
Add/Remove Devices.
- Click Auto to automatically configure device settings for the detected signal.
- If the soft front panel is not already running, click Run/Stop.
- Add oscilloscope measurements to the channel by selecting Add/Remove in the measurement table of the oscilloscope.
For more information on the measurements available for oscilloscopes in InstrumentStudio, refer to the InstrumentStudio Manual.