Components of a PXIe-4467 System

Download PDF

The PXIe-4467 is designed for use in a system that includes other hardware components, drivers, and software.

Notice A system and the surrounding environment must meet the requirements defined in the PXIe-4467 Specifications.

The following list defines the minimum required hardware and software for a system that includes a PXIe-4467.

Table 2. System Components
Component	Description and Recommendations
PXI Chassis	A PXI chassis houses the PXIe-4467 and supplies power, communication, and timing for PXIe-4467 functions.
PXI Controller or PXI Remote Control Module	You can install a PXI controller or a PXI remote control (MXI) module depending on your system requirements. These components, installed in the same PXI chassis as the PXIe-4467, interface with the instrument using NI device drivers.
Sound and Vibration Module	Your sound and vibration module.
Cables and Accessories	Cables and accessories allow connectivity to/from your instrument for measurements. Refer to Cables and Accessories for recommended cables and accessories and guidance.
NI-DAQmx Driver	Instrument driver software that provides functions to interact with the PXIe-4467 and execute measurements using the PXIe-4467. Note NI recommends to always use the most current version of NI-DAQmx with the PXIe-4467. You can find the NI-DAQmx driver requirements in the NI-DAQmx Readme.
NI Applications	NI-DAQmx offers driver support for the following applications: LabVIEW LabWindows/CVI NI-DAQmx Measurement Studio Integration (Measurement Studio 2019) SignalExpress ANSI C .NET Python

Cables and Accessories

NI recommends using the following cables and accessories with your module.

Table 3. Cables and Accessories
Accessory Description	Notes	Part Number
1-Pin BNC (Male or Female) to 1-Pin SMB Female, 50 Ω Coaxial Cable		189425-0R6
10-32 Male to 1-Pin BNC Male, Low-Noise Coaxial Cable		780966-01
Mini XLR Female Microphone Cable	0.46 M length	140151-0R46
PXI Slot Blockers	Set of 5	199198-01

You can use the NI-DAQmx Driver to program your instrument in the supported ADE of your choice

NI-DAQmx—Use NI-DAQmx to communicate with and control your sound and vibration instrument.