Configuring the PXIe-4150 in Hardware Configuration Utility
- Updated2025-10-22
- 1 minute(s) read
NI recommends using Hardware Configuration Utility to perform initial hardware configuration.
-
Open Hardware Configuration Utility.
The PXIe-4150 should appear in the system pane automatically.
-
Record the name Hardware Configuration Utility assigns to the PXIe-4150 or, if desired, provide a custom name to
the PXIe-4150.
Use this name when programming the PXIe-4150.
-
Validate that your instrument is installed correctly:
- Select the PXIe-4150 module in the system pane and expand the Troubleshooting area of the configuration pane.
- Click Self-test.
Hardware Configuration Utility reports when the hardware setup is validated.