PCIe-8364 Specifications

Definitions

Warranted Specifications describe the performance of a model under stated operating conditions and are covered by the model warranty.

Characteristics describe values that are relevant to the use of the model under stated operating conditions but are not covered by the model warranty.

  • Typical—describes the performance met by a majority of models.
  • Nominal—describes an attribute that is based on design, conformance testing, or supplemental testing.
  • Measured—describes the measured performance of a representative model.

    • Values are Typical unless otherwise noted.

    Conditions

    Specifications are are typical at 25 °C, unless otherwise stated.

    Notice Specifications are subject to change without notice

    PCIe-8364 Pinout

    Use the pinout to identify terminals on the PCIe-8364.

    Figure 1. PCIe-8364 connector pinout


    Table 3. Signal descriptions
    Pin Number Signal Description
    A1 PERn0 Differential PCI Express receiver lane
    A2 PERp0 Differential PCI Express receiver lane
    A3 NC No connect
    A4 GND Ground reference for PCI Express receiver lane
    A5 CREFCLKn Differential 100 MHz cable reference clock
    A6 CREFCLKp Differential 100 MHz cable reference clock
    A7 GND Ground reference for cable reference clock
    A8 CPERST# Cable PERST#
    A9 GND Ground reference for PCI Express transmitter lane
    B1 GND Ground reference for PCI Express receiver lane
    B2 NC No connect
    B3 CWAKE# Power management signal for Wakeup events (optional)
    B4 CPRSNT# Detects the following:
    • whether a cable is installed
    • whether the downstream subsystem is powered
    B5 GND Ground reference for cable reference clock
    B6 NC No connect
    B7 CPWRON Upstream subsystem Power Valid notification
    B8 PETn0 Differential PCI Express transmitter lane
    B9 PETp0 Differential PCI Express transmitter lane

    Physical Characteristics

    Table 4. Physical Characteristics
    Printed circuit board dimensions 9.93 cm × 7.11 cm (3.91 in. × 2.8 in.)

    For more information, visit ni.com/dimensions and search by module number.
    Weight 0.59 kg (1.30 lb), typical
    I/O connector 18-pin TDP
    Maximum cable length 7 m
    Form factor Standard height, half length, single slot, x1 PCI Express
    Slot compatibility Fully compatible with x1, x4, x8, x16 PCI Express slot[1]1 Some motherboards reserve the x16 slot for graphics use. For PCI Express guidelines, visit ni.com/info and enter the Info Code PCIExpress.
    Integrated air mover (fan) No

    Power Requirements

    Table 5. Power Requirements
    Power Rail Typical Current Maxiumum Current
    +3.3 V 750 mA 1,350 mA
    +3.3 V AUX 1 mA 10 mA
    +12 V 0 A 0 A

    Cleaning

    Clean exterior surfaces with a dry, lint-free cloth or soft-bristle brush. Do not use abrasive compounds on any part of the product. Do not disassemble or remove any part of the enclosure of the product when cleaning. Contact NI Services (ni.com/support) for more information.

    Caution Disconnect power and electrical connections before performing any cleaning of the product.
    Caution Débranchez l’alimentation et les connexions électriques avant de nettoyer le produit.

    Environmental Guidelines

    Notice Failure to follow the mounting instructions in the product documentation can cause temperature derating.
    Notice This product is intended for use in indoor applications only.
    Notice All cabling should be strain-relieved near input connectors. Take care not to directionally bias cable connectors within input connectors when applying strain relief.

    Environmental Characteristics

    Table 6. Temperature
    Operating, local[2]2 For PCI Express adapter cards with integrated air movers, NI defines the local operational ambient environment to be at the fan inlet. For cards without integrated air movers, NI defines the local operational ambient environment to be 25 mm (1 in.) upstream of the leading edge of the card. For more information about the local operational ambient environment definition for PCI Express adapter cards, visit ni.com/info and enter the Info Code pcielocalambient.0 °C to 55 °C
    Storage-20 °C to 70 °C
    Table 7. Humidity
    Operating10% RH to 90% RH, noncondensing
    Storage5% RH to 95% RH, noncondensing
    Table 8. System Slot Airflow
    System slot airflow 0.4 m/s (80 LFM)
    Table 9. Pollution Degree
    Pollution Degree2
    Table 10. Maximum Altitude
    Maximum altitude2,000 m (800 mbar) at a 25 °C ambient temperature

    1 Some motherboards reserve the x16 slot for graphics use. For PCI Express guidelines, visit ni.com/info and enter the Info Code PCIExpress.

    2 For PCI Express adapter cards with integrated air movers, NI defines the local operational ambient environment to be at the fan inlet. For cards without integrated air movers, NI defines the local operational ambient environment to be 25 mm (1 in.) upstream of the leading edge of the card. For more information about the local operational ambient environment definition for PCI Express adapter cards, visit ni.com/info and enter the Info Code pcielocalambient.