Specifies the signal to drive the 10 MHz Reference Clock on the PXI backplane. This option can be configured only when the PXI-5600 is installed in the Star Trigger Controller Slot, also known as the System Timing Slot, of the PXI chassis.

Supported Devices: PXI-5600 (external digitizer mode), PXI-5661

Related Topics

System Reference Clock

Triggers

Events


icon

Inputs/Outputs

  • civrn.png instrument handle —

    instrument handle identifies your instrument session. instrument handle is obtained from the niRFSA Initialize VI or the niRFSA Initialize With Options VI.

  • cstr.png PXI Clk10 source —

    PXI Clk10 source specifies the signal to drive the 10 MHz Reference Clock on the PXI backplane. This option can only be configured when the PXI-5600 is in Slot 2 of the PXI chassis.

    None The device does not drive the PXI 10 MHz backplane Reference clock.
    OnboardClock The device drives the PXI 10 MHz backplane Reference Clock with the PXI-5600 onboard clock. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the PXI-5600 front panel to use this option.
    RefIn The device drives the PXI 10 MHz backplane Reference Clock with the reference source attached to the PXI-5600 REF IN connector. You must connect the 10 MHz OUT connector to the PXI 10 MHz I/O on the PXI-5600 front panel to use this option.
  • cerrcodeclst.png error in —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • iivrn.png instrument handle out —

    instrument handle out passes a reference to your instrument session to the next VI. instrument handle is obtained from the niRFSA Initialize VI or the niRFSA Initialize With Options VI and identifies a particular instrument session.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.