Stops an acquisition previously started with the niRFSA Initiate VI or the niRFSA Read Power Spectrum (Cluster) VI. You can also use the niRFSA Abort VI to stop a self calibration. Calling this VI is optional, unless you want to stop an acquisition before it is complete or you are continuously acquiring data.

You can stop the following kinds of acquisitions:

  • Triggered spectrum acquisitions that have not yet been triggered
  • Multispan acquisitions in progress
  • Average spectrum acquisitions in progress
  • Single-record spectrum acquisitions in progress
  • Streaming in progress

Supported Devices: PXI-5600, PXIe-5601/5603/5605/5606 (external digitizer mode), PXIe-5644/5645/5646, PXI-5661, PXIe-5663/5663E/5665/5667/5668, PXIe-5698, PXIe-5820/5830/5831/5832/5840/5841/5842/5860


icon

Inputs/Outputs

  • civrn.png instrument handle —

    instrument handle identifies your instrument session. instrument handle is obtained from the niRFSA Initialize VI or the niRFSA Initialize With Options VI.

  • cerrcodeclst.png error in —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • iivrn.png instrument handle out —

    instrument handle out passes a reference to your instrument session to the next VI. instrument handle is obtained from the niRFSA Initialize VI or the niRFSA Initialize With Options VI and identifies a particular instrument session.

  • ierrcodeclst.png error out —

    error out contains error information. So if an error was contained in error in and this VI also produces an error, error out contains the same information as error in. For all other cases, this output provides standard error out functionality.