Routes the scan advanced output trigger from a trigger bus line (TTLx) to the front or rear connector.

Use this VI when handshaking with a switch module that is not directly cabled to the controller. In this module's session, set the scan advanced output bus line to a trigger bus line. In the cabled module's session, use this VI to route from the trigger bus line to the front or rear connector of the cabled module.

If this VI is used to route scan advanced from a TTL line, specify the TTL line as the scan advanced output destination in the niSwitch Configure Scan Trigger VI.

Related Topics


icon

Inputs/Outputs

  • cbool.png invert (False) —

    invert inverts the input trigger signal from rising to falling and falling to rising. The default value is FALSE (0).

    TRUE (1)

    Inverts the input trigger signal from falling to rising.
    FALSE (0)

    Inverts the input trigger signal from rising to falling.
  • civrn.png instrument handle —

    instrument handle identifies a particular NI-SWITCH session established with the niSwitch Initialize With Topology VI, the niSwitch Initialize With Options VI, or the niSwitch Initialize VI.

  • ci32.png scan advanced output connector —

    scan advanced output connector is the Scan Advanced Output destination. Valid locations are the front and rear connectors.

  • ci32.png scan advanced output bus line —

    scan advanced output bus line is the trigger line to route the scan advanced output trigger from the front or rear connector. Select None (default) to break an existing route.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • iivrn.png instrument handle out —

    instrument handle out identifies a particular NI-SWITCH session established with the niSwitch Initialize With Topology VI, the niSwitch Initialize With Options VI, or the niSwitch Initialize VI and used for all subsequent NI-SWITCH calls.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.