Configures the properties for synchronizing the digitizer to an external clock or sending the digitizer's clock output to be used as a synchronizing clock for other devices.

Note Some features are not supported by all digitizers. Refer to Features Supported by Device for more information.

Related topics


icon

Inputs/Outputs

  • cu16.png reference (input) clock source —

    input clock source specifies the input source for the PLL reference clock (such as the 1-20 MHz clock on SMC-based devices) to which the digitizer is phase-locked for all digitizers. Refer to the Reference (Input) Clock Source property for defined values.

    Default Value: None

  • civrn.png instrument handle —

    instrument handle identifies a particular instrument session.

  • cu16.png clock sync pulse source —

    clock sync pulse source specifies the line on which the sample clock or the one-time sync pulse is sent or received.

    Default Value: RTSI 0

    Refer to the Clock Sync Pulse Source property for defined values.

  • cbool.png master enabled —

    master enabled specifies whether the device is a master or a slave; the master device is typically the originator of the trigger signal and clock sync pulse.

    For a standalone device, set this parameter to FALSE.

    Default Value: FALSE

  • cerrcodeclst.png error in —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • cu16.png output clock source —

    output clock source specifies the output source for the PLL reference clock to which the sample clock of another digitizer can be phase-locked. Refer to the Output Clock Source property for more information.

    Default Value: None

  • iivrn.png instrument handle out —

    instrument handle out has the same value as the instrument handle.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.