Defines the path losses between the RF IN connector of the signal analyzer and the device under test.

Configure RFmx Constant Attenuation VI
Specifies a constant loss between the RF IN connector of the signal analyzer and the device under test.
Configure RFmx Attenuation (XML File) VI
Specifies the absolute path to the RF system calibration XML file created using the RF System Calibration Assistant. Use the RF System Calibration Assistant to save multiple analyzer path calibrations in a single xml file. Specify the path to use with the RFmx Attenuation Path Name input. Although the RF System Calibration Assistant allows you to calibrate one path at multiple reference levels for the same frequency, this API supports calibrations done at only one reference level for each frequency. This function returns an error if you do not wire the RFmx XML File Path input or specify an empty or relative path.
Configure RFmx Attenuation (S2P File) VI
Defines the path losses between the RF IN connector of the signal analyzer and the device under test using a S2P file.

Parent topic: Configuration

Power-Added Efficiency Measurement Library LabVIEW VI Reference

Log in to get a better experience