NIHSDIO_ATTR_TRIGGER_DESKEW
- Updated2023-02-21
- 1 minute(s) read
Specific Attribute
| Data type |
Access | Applies to | Coercion | High-Level Functions |
|---|---|---|---|---|
| ViReal64 | R/W | N/A | None | None |
Description
Specifies, per channel, the fixed time delay after the Sample clock rising edge when the device samples on a trigger. The value of this attribute is added to the value of the NIHSDIO_ATTR_TRIGGER_POSITION_DELAY attribute to determine the total delay. Unlike the NIHSDIO_ATTR_TRIGGER_POSITION_DELAY attribute, this attribute is specified in seconds.
 |
Note This attribute is supported only on PFI 1 and PFI 2 on NI 6555/6556 devices. |
Valid values, in seconds, depend on your clock rate and are represented by the equation –2(1/f) to +3(1/f), where f is the frequency of your clock rate.
The default value is 0.