Sets the signal generator to receive a synchronization signal to synchronize two or more signal generators. One signal generator should route a SYNC signal to a RTSI line using the niFgen Export Signal VI (niFgen Route Signal Out VI for the NI 5404), and other signal generators should receive the signal using this VI.

Note The signal generator must not be in the Generating state when you call this VI.
Note This VI is not required for synchronization.


icon

Inputs/Outputs

  • civrn.png Instrument Handle —

    Instrument Handle identifies a particular instrument session.

    Instrument Handle is obtained from the niFgen Initialize VI, niFgen Initialize With Options VI, or the niFgen Initialize With Channels VI.

  • cstr.png Channel Name —

    Channel Name specifies the channel that this VI uses.

  • cu32.png Synchronization Source (default: 0=none) —

    Synchronization Source specifies the source of the synchronization signal you want to use.

    Default value: 0=none

    Input Value Synchronization Source
    0 NONE
    1 TTL0
    2 TTL1
    3 TTL2
    4 TTL3
    5 TTL4
    6 TTL5
    7 TTL6
    8 RTSI 0
    9 RTSI 1
    10 RTSI 2
    11 RTSI 3
    12 RTSI 4
    13 RTSI 5
    14 RTSI 6
  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

    Default value: no error

  • iivrn.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your instrument session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.