Programs the adjusted reference value to the device.

Note This VI is not supported by all devices. Refer to Supported VIs by Device for information about supported devices.

Refer to the calibration procedure for the device you are calibrating for detailed instructions on the appropriate use of this VI. This VI can only be called from an external calibration session.


icon

Inputs/Outputs

  • civrn.png instrument handle —

    instrument handle identifies a particular instrument calibration session. instrument handle is obtained from the niDCPower Initialize External Calibration VI.

  • ci32.png internal reference —

    internal reference specifies the internal reference to be adjusted.

    5V Reference (1054) Calibration pin connected to 5 V internal reference.
    100kOhm Reference (1055) Calibration pin connected to 100 kΩ internal reference.
  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • cdbl.png adjusted internal reference value —

    adjusted internal reference value specifies the updated value of the internal reference that will be programmed to the device.

  • iivrn.png instrument handle out —

    instrument handle out passes the handle used to identify the session in all subsequent NI-DCPower VI calls.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.