DCPowerOutputSourceOutputCutoff Class
- Updated2025-10-06
- 2 minute(s) read
Properties for controlling output cutoff limits for supported instruments.
Derives from
Syntax
Namespace: NationalInstruments.ModularInstruments.NIDCPower
public class DCPowerOutputSourceOutputCutoff : DCPowerSubObject
Remarks
When an output cutoff is engaged, the output of the channel(s) is disconnected.
Thread Safety
All members of this type are safe for multithreaded operations.
Properties
| Name | Description |
|---|---|
| CurrentChangeLimitHigh | Specifies a limit for positive current slew rate, in amps per microsecond, for output cutoff. If the current increases at a rate that exceeds this limit, the output is disconnected. |
| CurrentChangeLimitLow | Specifies a limit for negative current slew rate, in amps per microsecond, for output cutoff. If the current decreases at a rate that exceeds this limit, the output is disconnected. |
| CurrentMeasureLimitHigh | Specifies a high limit current value, in amps, for output cutoff. If the measured current exceeds this limit, the output is disconnected. |
| CurrentMeasureLimitLow | Specifies a low limit current value, in amps, for output cutoff. If the measured current falls below this limit, the output is disconnected. |
| CurrentOverrangeEnabled | Enables or disables current overrange functionality for output cutoff. If enabled, the output is disconnected when the measured current saturates the current range. |
| Delay | Delays disconnecting the output by the time you specify, in seconds, when a limit is exceeded. |
| Enabled | Enables or disables output cutoff functionality. If enabled, you can define output cutoffs that, if exceeded, cause the output of the specified channel(s) to be disconnected. |
| VoltageChangeLimitHigh | Specifies a limit for positive voltage slew rate, in volts per microsecond, for output cutoff. If the voltage increases at a rate that exceeds this limit, the output is disconnected. |
| VoltageChangeLimitLow | Specifies a limit for negative voltage slew rate, in volts per microsecond, for output cutoff. If the voltage decreases at a rate that exceeds this limit, the output is disconnected. |
| VoltageMeasureLimitHigh | Specifies a high limit voltage value, in volts, for output cutoff. If the measured voltage exceeds this limit, the output is disconnected. |
| VoltageMeasureLimitLow | Specifies a low limit voltage value, in volts, for output cutoff. If the measured voltage falls below this limit, the output is disconnected. |
| VoltageOutputLimitHigh | Specifies a high limit voltage value, in volts, for output cutoff. If the voltage output exceeds this limit, the output is disconnected. |
| VoltageOutputLimitLow | Specifies a low limit voltage value, in volts, for output cutoff. If the voltage output falls below this limit, the output is disconnected. |