Installing C Series Modules

The following figure shows the mechanical dimensions of C Series I/O modules.

Figure 13. C Series I/O Module, Front and Side View with Dimensions

1378

Complete the following steps to install a C Series I/O module in the chassis.

  1. Make sure that no I/O-side power is connected to the I/O module. If the system is in a nonhazardous location, the chassis power can be on when you install I/O modules.
  2. Align the I/O module with an I/O module slot in the chassis. The module slots are labeled 1 to 14, left to right.
    Figure 14. Installing an I/O Module in the Chassis

    1378

    1. Insertion Groove
    2. Latch
  3. Squeeze the latches and insert the I/O module into the module slot.
  4. Press firmly on the connector side of the I/O module until the latches lock the I/O module into place.
  5. Repeat these steps to install additional I/O modules.

Removing C Series Modules

Complete the following steps to remove a C Series I/O module from the chassis.
  1. Make sure that no I/O-side power is connected to the I/O module. If the system is in a nonhazardous location, the chassis power can be on when you remove I/O modules.
  2. Squeeze the latches on both sides of the module and pull the module out of the chassis.