Installing Software on the Host Computer

Before using the NI-9149, you must install the following application software and device drivers on the host computer in this order:

  1. LabVIEW 2014 SP1 or later
  2. LabVIEW FPGA Module 2014 SP1 or later
  3. NI CompactRIO 14.5 or later
Note LabVIEW FPGA Module is not required when using Scan Interface mode. To program the user-accessible FPGA on the NI-9149, LabVIEW FPGA Module is required.

For minimum software support information, visit ni.com/r/swsupport.