System Identification Indicators
- Updated2023-02-21
- 1 minute(s) read
Requires: Advanced Signal Processing Toolkit or Control Design and Simulation Module. This topic might not match its corresponding palette in LabVIEW depending on your operating system, licensed product(s), and target.
Use the System Identification indicators to display Bode, Nyquist, and pole-zero plots on the front panel window of a VI you create.
You also can create these indicators from the block diagram by using the SI Bode Plot VI, the SI Nyquist Plot VI, and the SI Pole-Zero Plot VI.
| Palette Object | Description |
|---|---|
| SI Bode Plot Indicator | Displays the Bode plot generated from the SI Bode Plot VI. |
| SI Generic Model Indicator | Contains information about the mathematical model of a dynamic system. You can use the Model Management VIs to access the information of a system model. |
| SI Nyquist Plot Indicator | Displays the Nyquist plot generated from the SI Nyquist Plot VI. |
| SI Pole-Zero Plot Indicator | Displays the pole-zero plot generated from the SI Pole-Zero Plot VI. |