The NI 9913 DIN rail mounting kit (part number 781740-01) contains one clip for mounting the IVN-8563 on a standard 35 mm DIN rail. The four holes on the bottom of the IVN-8563 allow for mounting the device in multiple orientations.

Fasten the DIN rail clip to the IVN-8563 using two FLH #6-32 screws (included in the kit) with a #2 Phillips screwdriver. The following figure illustrates attaching the DIN rail clip.

Figure 1. DIN Rail Clip Installation Options


Clip the chassis onto the DIN rail with the larger lip of the DIN rail clip positioned up, as shown in the following figure.

Figure 5. DIN Rail Clip Parts


  1. DIN Rail Clip
  2. DIN Rail Spring
  3. DIN Rail
Note Use only the screws provided in the DIN rail kit. Using longer screws may damage the IVN-8563.