Getting Started with the cRIO-9805

This document provides information to help you get started with the cRIO-9805, connecting the module to power, connecting to Ethernet, and configuring the device and the network.

Figure 1. cRIO-9805 Front Panel

1378

  1. Power/Status LED
  2. Reset button
  3. Ethernet ports 0 to 3
  4. Ethernet LEDs
  5. Power connector (9 V to 30 V)
Table 1. Power Connector Pinout
Pinout Pin Description
1378 V Power input
C Common
Table 2. Power/Status LED Indicators
LED Color LED Pattern Indication
Blue Solid The cRIO-9805 is powered on.
Yellow Solid The cRIO-9805 is booting.
Blinking The cRIO-9805 is in recovery mode.
Blue and Yellow Solid The cRIO-9805 is resetting.
— Off The cRIO-9805 is powered off.
Table 3. Ethernet Port Pinout
Fast Ethernet Signal Gigabit Ethernet Signal Pin Pinout
TX+ TX_A+ 1 1378
TX- TX_A- 2
RX+ RX_B+ 3
No Connect TX_C+ 4
No Connect TX_C- 5
RX- RX_B- 6
No Connect RX_D+ 7
No Connect RX_D- 8
Table 4. Ethernet LED Indicators
LED LED Color LED Pattern Indication
ACT/LINK — Off LAN link not established
Green Solid LAN link established
Blinking Activity on LAN
10/100/1000 Yellow Solid 1,000 Mbit/s data rate selected
Green Solid 100 Mbit/s data rate selected
— Off 10 Mbit/s data rate selected