The cRIO-906x provides a RESET button to reset the processor in the same manner as cycling power.

Figure 7. RESET Button Location on the cRIO-9063/9064/9065/9066/9067


  1. RESET button
Figure 8. RESET Button Location on the cRIO-9068


  1. RESET button

Troubleshooting Network Connectivity with the RESET Button

You can use the RESET button to troubleshoot network connectivity.

Complete the following steps to reset the network adapters to default settings.
  1. Hold the RESET button for 5 seconds, and then release it to boot the controller in safe mode and enable Console Out.
  2. Hold the RESET button again for 5 seconds to boot the controller into safe mode, enable Console Out, and reset network adapters to default settings.

System Reset

The following figure shows the reset behavior of the cRIO-906x.

Figure 9. Reset Button Behavior