Identifying FPGA Devices in MAX
- Updated2023-04-11
- 1 minute(s) read
Identifying FPGA Devices in MAX
Complete the following steps to verify that the FPGA devices appear properly in MAX.
- Launch MAX.
- In the Configuration pane, expand Devices and Interfaces to see the list of installed devices. Installed devices appear under the name of their associated chassis.
-
Verify that the parameters of your host-side MXI adapter, such as slot and port numbers, match the ID of the FPGA to which the cable is connected.
Note Each FPGA will have a default name, such as ATCA-3671 "PXI1Slot2Port1Dev1-A," based on the configuration of your system.
Tip Find additional information, such as the model and serial number of the ATCA-3671 main board, as well as the FPGA ID of the connected FPGA, by selecting any ATCA-3671 FPGA device and opening the
Settings window.
Related Information
- Why Doesn't the Device Appear in MAX?
If you cannot find the ATCA-3671 FPGAs in MAX, complete one or more of the following steps.