Connecting to a Host Computer or PXI Chassis

All modules must be properly installed within the ATCA chassis before you connect to a host computer or PXI chassis.
Note Ensure that the ATCA-3671 is powered on and has finished initializing before connecting the module to the host computer or PXI chassis.

The following three figures show examples of hardware configuration options.


1378

  1. PXIe-1085 Chassis
  2. PXIe-8394 Module
  3. RTM-3661 Module
  4. ATCA-3671 Module

1378

  1. Host PC
  2. PXIe-8398 Remote Control Module
  3. RTM-3661 Module
  4. ATCA-3671 Module

1378

  1. Host PC
  2. ATCA-3671 Module
Note To debug using the JTAG Programming Bundle for ATCA, set up any of the previous hardware configurations and connect the ATCA JTAG port to a PC using the adapter included in the JTAG Programming Bundle for ATCA.