Electrical Power VIs
- Updated2025-12-11
- 1 minute(s) read
May 2020, 373376J-01
Requires: Electrical Power Toolkit. This topic might not match its corresponding palette in LabVIEW depending on your operating system, licensed product(s), and target.
Use the Electrical Power VIs to perform electrical power analysis.
The VIs on this palette can return general LabVIEW error codes or specific Electrical Power error codes.
| Subpalette | Description |
|---|---|
| EV Power Test VIs | Use the EV Power Test VIs to perform power tests on electric vehicles. |
| File I/O VIs | Use the File I/O VIs to log data for electrical power analysis. |
| FPGA VIs | Use the FPGA VIs to measure electrical power data on FPGA targets. |
| Motor VIs | Use the Motor VIs to conduct condition monitoring on AC induction motors, including performing the motor current signature analysis (MCSA). |
| Power Measurement VIs | Use the Power Measurement VIs to measure common electrical power parameters and to perform harmonic analysis. |
| Power Quality VIs | Use the Power Quality VIs to perform power quality measurement in compliance with IEC 61000-4-7:2009, IEC 61000-4-15:2010, and IEC 61000-4-30:2008. |
| Protection VIs | Use the Protection VIs to generate data for the Protection VIs on FPGA targets to use. |
| Synchrophasor VIs | Use the Synchrophasor VIs to perform synchrophasor measurement and to build and parse synchrophasor message frames. The VIs for measuring synchrophasors are in compliance with IEEE Std C37.118.1-2011. The C37.118 Frame VIs build and parse synchrophasor message frames for real-time communication of synchrophasor measurement data between phasor measurement units (PMUs) and phasor data concentrators (PDCs) as defined in IEEE Std C37.118.2-2011. |
© 2011–2020 National Instruments. All rights reserved.