Code Option Name Description Default Unit Recommendation
AUTOPARTIAL Use auto-partial computation for all models — — — —
BADMOS3 Use old mos3 model (discontinuous with respect to kappa) — — — —
KEEPOPINFO Record operating point for each small-signal analysis Retains the operating point information when an AC, Distortion, or Pole-Zero analysis is run. — — Particularly useful if the circuit is large and you do not want to run a redundant ".OP" analysis.
MAXEVTITER Maximum event iterations at analysis point 0 — —
MAXOPALTER Maximum analog/event alternations in DCOP 0 — —
MINBREAK Minimum time between breakpoints 0 — —
NOOPALTER Do not do analog/event alternation in DCOP Off — —
INERTIALDELAY Use the Inertial Delay system flag If set, delays in the digital simulator will be treated using the inertial delay concept (glitches or pulses shorter than the delay parameters of the affected devices will be swallowed). — — Leave option ON. This will make the digital simulation more realistic and even improve simulation speed.
ADERROR Maximum Analog-to-Digital Interface Error Resets, or overrides, the maximum time that elapses between the time that a voltage at an A/D bridge passes a threshold and the time that the bridge detects this event. TMAX/10 s Small values will increase accuracy at the expense of decreased simulation speed. Use as needed.