It is important to work through this guide sequentially to identify and then pair up your device with compatible cables and accessories. To do this, complete the following steps:
Begin by using the following tables to locate your device or module. Once found, note your connector type, pin count, and any other notes for reference, and then move to the Cable and Accessory Compatibility Tables.
Important Note: "Group" used in this context is solely to categorize devices together that use the same cables and accessories. It does not necessarily indicate similar functionality, specifications, or other commonalities between the devices.
Model | Connector Type | Notes |
---|---|---|
PXI-2520 | DIN 160-pin | |
PXI-2521 | DIN 160-pin | |
PXI-2522 | DIN 160-pin | |
PXI-2523 | DIN 160-pin | |
PXI-2564 | D-Sub 37-pin | |
PXI-2565 | Combicon | |
PXI-2566 | D-Sub 62-pin | |
PXI-2568 | D-Sub 62-pin | |
PXI-2569 | LFH 200-pin | |
PXI-2570 | LFH 200-pin | |
PXI-2571 | LFH 200-pin | |
PXI-2586 | GMCT20 | |
PXIe-2569 | LFH 200-pin | |
Model | Connector Type | Notes |
---|---|---|
PXI-2567 | D-Sub 78-pin | Refer to the Known Limitation and Additional Information List |
Find the compatibility table that matches the pin count and connector type of your device. If you have questions on terminology, refer to the Glossary below.
Module or Device | Topology | Front Mounted Terminal Block | Cable | Remote Terminal Block | Custom Connectivity |
---|---|---|---|---|---|
2520 | 80x SPST | N/A | 160-Pin DIN to 4 D-Sub | TBX-50 TBX-50B | N/A |
160-Pin DIN to 160-Pin DIN 160-Pin Din to Bare Wire | N/A | ||||
2521 | 40x DPST | N/A | 160-Pin DIN to 4 D-Sub | TBX-50 TBX-50B | N/A |
160-Pin DIN to 160-Pin DIN 160-Pin Din to Bare Wire | N/A | ||||
2522 | 40x SPDT | N/A | 160-Pin DIN to 4 D-Sub | TBX-50 TBX-50B | N/A |
160-Pin DIN to 160-Pin DIN 160-Pin Din to Bare Wire | N/A | ||||
2523 | 26x DPDT | N/A | 160-Pin DIN to 4 D-Sub | TBX-50 TBX-50B | N/A |
160-Pin DIN to 160-Pin DIN 160-Pin Din to Bare Wire | N/A | ||||
2564 | 8x DPST 16x SPST | N/A | 37-Pin Female to Female D-Sub | N/A | N/A |
2565 | 16x SPST | 16-pin Terminal Plug Kit | N/A | N/A | N/A |
2566 | 8x DPDT 16x SPDT | TB-2666 | N/A | N/A | Backshell and Connector Kit for the PXI-2566 |
2568 | 15x DPST 31x SPST | N/A | 62-Pin D-Sub | TBX-62 | N/A |
2569 | 50x DPST 100x SPST | N/A | LFH200 to 4x50-pin D-Sub | TBX-50 TBX-50B | N/A |
LFH200 to Bare Wire | N/A | ||||
2570 | 40x SPDT | N/A | LFH200 to 4x50-pin D-Sub | TBX-50 TBX-50B | N/A |
LFH200 to Bare Wire | N/A | ||||
2571 | 66x SPDT | N/A | LFH200 to 4x50-pin D-Sub | TBX-50 TBX-50B | N/A |
LFH200 to Bare Wire | N/A | ||||
2586 | 5x DPST 10x SPST | N/A | GMCT20 to GMCT20 GMCT20 to Bare Wire | N/A | Connector and Backshell for NI PXI-258x |
Module or Device | Topology | Front Mounted Terminal Block | Cable | Remote Terminal Block | Custom Connectivity |
---|---|---|---|---|---|
2567 | Independent | N/A | N/A | N/A | N/A |
Click here to jump to the Known Limitations and Additional Information List.
This section is important to review because not every cable and accessory combination allows access to the full functionality of your NI General Purpose Relay device or module. This list contains notes about known limitations when using certain combinations of Switches cables and accessories. If your device or cable is not listed in this section, there are no known exceptions for it.
Model or Accessory | Note |
---|---|
2567 |
|
When purchasing a NI Relay or Relay Driver device or module, for ease of use, the cables and accessories are listed on the product selection page. To begin browsing NI Switches devices and modules, visit ni.com/switches.
You may also purchase your cables and accessories separately.