Note that this article replaces KnowledgeBase 5YEF595R : NI-Industrial Communications for EtherCAT and LabVIEW Version Compatibility. Some NI manuals may still reference the previous document. If you were redirected from the previous KnowledgeBase URL, please update your bookmarks accordingly.
In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.
NI IndCom for EtherCAT | LabVIEW Version | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
2020 | 2019 SP1 | 2019 | 2018 SP1 | 2018 | 2017 SP1 | 2017 | 2016 | 2015 SP1 | 2015 | |
20.0 | ||||||||||
19.0 | ||||||||||
18.5 | ||||||||||
18.0 | ||||||||||
17.6 | ||||||||||
17.0 | ||||||||||
16.1 | ||||||||||
16.0 | ||||||||||
15.0 | ||||||||||
14.5 |
Note: It is always recommended to have the latest version of the driver, as this will include up-to-date support of new hardware and new versions of software.
Note: NI-RIO is a requirement for NI-Industrial Communications for EtherCAT, so NI-Industrial Communications for EtherCAT and LabVIEW compatibility is determined based on the NI-RIO version being used. Make sure consult the NI-RIO and LabVIEW compatibility page as well as the NI-Industrial Communications for EtherCAT and NI-RIO compatibility page.
Compatible