NI R Series MultifunctionRIO July 2017 Bug Fixes

Visão geral

The following items are a subset of issues fixed in NI R Series Multifunction RIO Device Drivers July 2017 since NI R Series Multifunction RIO Device Drivers May 2017. If you have an issue ID, you can search this list to validate that the issue has been fixed in NI R Series Multifunction RIO Device Drivers July 2017 with LabVIEW 2017.
ID Fixed Issue


When performing self-calibration for the PXIe-7867 and PXIe-7868 the results may adjust to be less accurate for analog output channels.

Self-calibration uses internal measurements to verify and adjust for calibration-related errors without any external signal connections. Self-calibration minimizes the effects of any offset and gain drifts, particularly those due to temperature and is generally sufficient for taking relative measurements that can ignore a small amount of gain error.

A self-calibration can be performed either with the NI 78xxR Calibration Utility or the 



To execute self-calibration for the PXIe-7867 or PXIe-7868, NI R Series MultifunctionRIO July 2017 or later must be installed. This driver is available from


Glossary of Terms


  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).