January 2021
This file contains important information about VCSEL I-V Test Software 20.0.1, including installation instructions and known issues.
You can find more release information on VCSEL I-V Test Software Release Notes.
Product Security and Critical Updates
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
VCSEL I-V Test Software provides LabVIEW VIs and examples that allow you to create and deploy VCSEL I-V test applications. This software can perform compensation procedures to measure the path losses of every signal path, compensating for every VCSEL I-V Test subsystem channel. Additionally, VCSEL I-V Test Software executes I-V measurements in serial or parallel mode if the VCSEL I-V Test Subsystem contains multiple channels. You can use VCSEL VIs and examples to quickly start compensation and I-V measurements or create your own applications.
VCSEL I-V Test Software supports Windows 10 (64-bit).
VCSEL I-V Test Software 20.0.1 requires the following software versions.
Software | Versions Supported by VCSEL I-V Test Software |
---|---|
LabVIEW | 2018 (64-bit), 2019 (64-bit), 2020 (64-bit) |
NI-DCPower | 20.0 or later |
NI-SCOPE | 20.0 or later |
PXI Platform Services | 20.0 or later |
You must install LabVIEW before installing VCSEL I-V Test Software.
Visit ni.com/r/vcsel-software-download to download VCSEL I-V Test Software. If you do not already have NI software installed, NI automates installing NI Package Manager. Refer to the NI Package Manager Manual for more information about upgrading, repairing, and removing NI software using NI Package Manager.
To use VCSEL I-V Test Software, you must also install NI-DCPower, NI-SCOPE, and PXI Platform Services. If you do not already have NI-DCPower, NI-SCOPE, and PXI Platform Services installed, NI automates installing NI-DCPower, NI-SCOPE, and PXI Platform Services when you download VCSEL I-V Test Software.
Note Use the serial number in the Software Registration Card that is shipped with your purchased NI Product Bundle to activate VCSEL I-V Test Software. For more information about VCSEL I-V Test Software activation, refer to NI Software Activation.
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
The following list details the VCSEL I-V Test Subsystem options and their hardware models supported in VCSEL I-V Test Software 20.0.1.
VCSEL I-V Test VIs are available in LabVIEW from the Functions»User Libraries»VCSEL I-V Test palette.
Refer to the VCSEL I-V Test Software Help, accessible from Start»All Programs»National Instruments»VCSEL I-V Test»Documentation, for more information about VCSEL I-V Test VIs and examples.
Refer to the VCSEL I-V Test Subsystem User Manual, accessible from Start»All Programs»National Instruments»VCSEL I-V Test»Documentation, for more information about how to use VCSEL I-V Test Software to perform I-V measurements on the VCSEL I-V Test Subsystem. The VCSEL I-V Test Subsystem User Manual is also accessible from ni.com/r/vcsel-docs.
You can access the installed VCSEL I-V Test examples at Start»All Programs»National Instruments»VCSEL I-V Test»Examples.
Select Help»Find Examples from LabVIEW to launch the NI Example Finder and navigate to Toolkits and Modules»VCSEL I-V Test to access the VCSEL examples. LabVIEW examples for VCSEL I-V Test Software are located in the labview\examples\VCSEL I-V Test directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Copyright
© 2020-2021 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
378403B-01