This file contains installation instructions and compatibility information for NI Linux RT System Image.
You can find more release information on ni.com.
If you plan to use LabVIEW NXG, refer to LabVIEW NXG Support and Considerations.
The NI Linux RT System Image is utility software that includes the system image required for formatting and provisioning most NI real-time controllers to run the NI Linux Real-Time OS. You must update the system image to install the latest drivers to your NI real-time controller.
Installing NI Linux RT System Image 20.7 should meet the requirements for LabVIEW and the LabVIEW Real-Time Module. Refer to the LabVIEW 2020 Platform Readme and LabVIEW 2020 Real-Time Module Readme for more information.
NI Linux RT System Image 20.7 supports the following operating systems:
Note NI Linux RT System Image no longer supports Windows Vista/XP/7/8, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. NI Linux RT System Image 20.7 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI Linux RT System Image 20.7 to an unsupported OS. Additionally, after installing NI Linux RT System Image 20.7, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support, visit ni.com/r/win32bitsupport.
NI Linux RT System Image 20.7 supports the following application software versions, including service packs.
|Application Software||Versions Supported|
|LabVIEW||LabVIEW 2019 SP1, LabVIEW 2020, LabVIEW 2021|
Download the NI Linux RT System Image 20.7 installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
The following list details the hardware models supported in NI Linux RT System Image 20.7.
Refer to NI Linux Real-Time Operating System PXI Hardware Support for support information for your PXI hardware.
The following sections detail considerations for using LabVIEW NXG 5.1 with NI Linux RT System Image 20.7.
Software support for LabVIEW NXG differs in the following ways:
NI Linux RT System Image 20.7 supports the following devices in LabVIEW NXG 5.1.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
no longer supports Windows Vista/XP/7/8.x, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit http://www.ni.com/r/win32bitsupport.
© 1999–2021 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
An NI Partner is a business entity independent from NI and has no agency, partnership, or joint-venture relationship with NI.
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.