January 2021
This file contains important information about the NI Software DVD Set, including installation instructions and a list of included products.
Products Included in NI Software DVD Set
Product Security and Critical Updates
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Complete the following steps to install products in the NI Software DVD Set:
Save the media to modify or repair your installation or to distribute NI software with your custom-built installers. To request additional media, refer to the NI website.
The following products are included in the NI Software DVD Set. Refer to the readme of each product for information including system requirements, installation, activation, known issues, and bug fixes.
| Product | Version | Bitness |
|---|---|---|
| Circuit Design Suite | 14.2.0 | 32-bit and 64-bit |
| DAQExpress | 5.1.0 | 64-bit |
| DIAdem English | 2020 SP1 | 64-bit |
| DIAdem German | 2020 SP1 | 64-bit |
| DIAdem Japanese | 2020 SP1 | 64-bit |
| LabVIEW (32-bit) Chinese | 2020 SP1 | 32-bit |
| LabVIEW (32-bit) English | 2020 SP1 | 32-bit |
| LabVIEW (32-bit) French | 2020 SP1 | 32-bit |
| LabVIEW (32-bit) German | 2020 SP1 | 32-bit |
| LabVIEW (32-bit) Japanese | 2020 SP1 | 32-bit |
| LabVIEW (32-bit) Korean | 2020 SP1 | 32-bit |
| LabVIEW (64-bit) English | 2020 SP1 | 64-bit |
| LabVIEW NXG | 5.1.0 | 64-bit |
| LabWindows/CVI | 2020 | 32-bit |
| Measurement Studio | 2019 f4 | 32-bit and 64-bit |
| NI Switch Executive 2020 | 20.0.0 | 32-bit and 64-bit |
| Requirements Gateway | 2018 | 32-bit and 64-bit |
| TestStand (32-bit) | 2020 | 32-bit |
| TestStand (64-bit) | 2020 | 64-bit |
| VeriStand | 2020 R4 | 64-bit |
| Vision Builder for Automated Inspection | 2020 | 32-bit and 64-bit |
| Product | Version | Bitness |
|---|---|---|
| Automotive Diagnostic Command Set Toolkit | 20.6.0 | 32-bit and 64-bit |
| ECU Measurement and Calibration Toolkit | 20.6.0 | 32-bit and 64-bit |
| JKI VI Package Manager | 2020 | 32-bit and 64-bit |
| LabVIEW Advanced Signal Processing Toolkit (32-bit) | 2020 | 32-bit |
| LabVIEW Advanced Signal Processing Toolkit (64-bit) | 2020 | 64-bit |
| LabVIEW Control Design and Simulation Module (32-bit) | 2020 | 32-bit |
| LabVIEW Control Design and Simulation Module (64-bit) | 2020 | 64-bit |
| LabVIEW Datalogging and Supervisory Control Module | 2020 | 32-bit |
| LabVIEW Datalogging and Supervisory Control Runtime | 2020 | 32-bit |
| LabVIEW Desktop Execution Trace Toolkit | 2020 | 32-bit and 64-bit |
| LabVIEW Digital Filter Design Toolkit (32-bit) | 2020 | 32-bit |
| LabVIEW Digital Filter Design Toolkit (64-bit) | 2020 | 64-bit |
| LabVIEW FPGA Compilation Tool for ISE 14.7 | 2020 | 32-bit and 64-bit |
| LabVIEW FPGA Compilation Tool for Vivado 2019.1 | 2020 | 64-bit |
| LabVIEW FPGA Compile Farm Toolkit | 2020 | 32-bit and 64-bit |
| LabVIEW FPGA Module (32-bit) Chinese | 2020 f1 | 32-bit |
| LabVIEW FPGA Module (32-bit) English | 2020 f1 | 32-bit |
| LabVIEW FPGA Module (32-bit) Japanese | 2020 f1 | 32-bit |
| LabVIEW FPGA Module (64-bit) | 2020 f1 | 64-bit |
| LabVIEW MathScript Module (32-bit) Chinese | 2020 | 32-bit |
| LabVIEW MathScript Module (32-bit) English | 2020 | 32-bit |
| LabVIEW MathScript Module (32-bit) French | 2020 | 32-bit |
| LabVIEW MathScript Module (32-bit) German | 2020 | 32-bit |
| LabVIEW MathScript Module (32-bit) Japanese | 2020 | 32-bit |
| LabVIEW MathScript Module (32-bit) Korean | 2020 | 32-bit |
| LabVIEW MathScript Module (64-bit) | 2020 | 64-bit |
| LabVIEW Model Interface Toolkit | 2020 | 32-bit |
| LabVIEW NXG FPGA Module | 5.1.0 | 64-bit |
| LabVIEW NXG Real-Time Module | 5.1.0 | 64-bit |
| LabVIEW NXG Web Module | 5.1.0 | 64-bit |
| LabVIEW Real-Time Module Chinese | 2020 | 32-bit |
| LabVIEW Real-Time Module English | 2020 | 32-bit |
| LabVIEW Real-Time Module Japanese | 2020 | 32-bit |
| LabVIEW Sound and Vibration Toolkit (32-bit) | 2020 | 32-bit |
| LabVIEW Sound and Vibration Toolkit (64-bit) | 2020 | 64-bit |
| LabVIEW Unit Test Framework Toolkit (32-bit) | 2020 | 32-bit |
| LabVIEW Unit Test Framework Toolkit (64-bit) | 2020 | 64-bit |
| LabVIEW VI Analyzer Toolkit (32-bit) | 2020 | 32-bit |
| LabVIEW VI Analyzer Toolkit (64-bit) | 2020 | 64-bit |
| LabVIEW myRIO Toolkit | 2019 | 32-bit |
| LabWindows/CVI Execution Profiler | 1.1.1 | 32-bit and 64-bit |
| LabWindows/CVI PID Control Toolkit | 2.2 | 32-bit |
| LabWindows/CVI SQL Toolkit | 2.4 | 32-bit and 64-bit |
| NI LabVIEW OPC UA Toolkit (32-bit) Chinese | 2020 | 32-bit |
| NI LabVIEW OPC UA Toolkit (32-bit) English | 2020 | 32-bit |
| NI LabVIEW OPC UA Toolkit (32-bit) Japanese | 2020 | 32-bit |
| NI LabVIEW OPC UA Toolkit (64-bit) English | 2020 | 64-bit |
| VeriStand Model Framework | 2020 R4 | 32-bit and 64-bit |
| VeriStand Model Generation Support for LabVIEW 2020 | 2020 R4 | 32-bit and 64-bit |
| Vision Development Module | 2020 SP1 | 32-bit and 64-bit |
| Product | Version | Bitness |
|---|---|---|
| FlexRIO with Integrated I/O | 20.6.0 | 32-bit and 64-bit |
| FlexRIO with Modular I/O | 20.6.0 | 32-bit and 64-bit |
| IVI Compliance Package | 20.0.0 | 32-bit and 64-bit |
| NI CompactRIO | 20.5.0 | 32-bit and 64-bit |
| NI Industrial Controller Device Drivers | 20.0.0 | 32-bit and 64-bit |
| NI PXI Platform Services | 20.5.0 | 32-bit and 64-bit |
| NI R Series Multifunction RIO | 20.0.0 | 32-bit and 64-bit |
| NI-488.2 | 20.0.0 | 32-bit and 64-bit |
| NI-DAQmx | 20.1.0 | 32-bit and 64-bit |
| NI-DCPower | 20.5.0 | 32-bit and 64-bit |
| NI-DMM | 20.0.0 | 32-bit and 64-bit |
| NI-ELVISmx | 19.0.0 | 32-bit and 64-bit |
| NI-FGEN | 20.0.0 | 32-bit and 64-bit |
| NI-HSDIO | 20.0.0 | 32-bit and 64-bit |
| NI-IMAQ | 20.6.0 | 32-bit and 64-bit |
| NI-IMAQ I/O | 20.6.0 | 32-bit and 64-bit |
| NI-IMAQdx | 20.6.0 | 32-bit and 64-bit |
| NI-Industrial Communications for EtherCAT | 20.0.0 | 32-bit |
| NI-Industrial Communications for EtherNet/IP | 20.0.0 | 32-bit and 64-bit |
| NI-SCOPE | 20.0.0 | 32-bit and 64-bit |
| NI-SWITCH | 20.0.0 | 32-bit and 64-bit |
| NI-Serial | 20.0.0 | 32-bit and 64-bit |
| NI-Sync | 20.1.0 | 32-bit and 64-bit |
| NI-VISA | 20.0.0 | 32-bit and 64-bit |
| NI-XNET | 20.5.0 | 32-bit and 64-bit |
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
NI Software will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
Copyright
© 2019–2021 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
377934D-01