This file contains important information about the LabVIEW Communications 802.11 Application Framework (802.11 Application Framework), including installation instructions, new features, and known issues.
This software installation provides real-time physical layer (PHY) and lower and middle medium access control (MAC)-layer reference design based on the IEEE 802.11 wireless standard.
802.11 Application Framework 3.0 adds support for LabVIEW Communications System Design Suite 3.0 and 3.1.
802.11 Application Framework 2.5 adds support for LabVIEW Communications System Design Suite 2.1.
802.11 Application Framework 2.2 includes the following new features:
802.11 Application Framework 2.1 includes the following new features:
The following hardware products are supported in all operating systems listed in the Supported Operating Systems section.
Refer to the getting started guide for more information and a complete list of required hardware.
802.11 Application Framework 3.0 has the following requirements:
802.11 Application Framework 3.0 supports Windows 10/8.11/7 SP12.
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note LabVIEW Communications System Design Suite supports only 64-bit operating systems.
Note 802.11 Application Framework 3.0 does not support Windows Server non-R2 editions.
802.11 Application Framework 3.0 supports LabVIEW Communications System Design Suite 3.0 and 3.1.
The documentation set for 802.11 Application Framework is composed of the following documents.
|LabVIEW Communications 802.11 Application Framework 3.0 Manual||Contains detailed, technical information on how to use the software and included features.||Visit ni.com/info and enter the Info Code 80211AppFWManual|
|LabVIEW Communications 802.11 Application Framework 3.0 Getting Started Guide||Contains software and hardware installation, configuration, signal connection, and troubleshooting information for the 802.11 Application Framework.||Available in the Project Files tab of the application framework project(s) and at ni.com/manuals|
|LabVIEW Communications 802.11 Application Framework 3.0 Readme||HTML (this document)||Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.||Available in the Project Files tab of the application framework project(s) and at ni.com/manuals|
To access the latest LabVIEW Communications System Design Suite Manual, visit ni.com/info and enter the Info Code commsmanual. This manual includes an introduction to LabVIEW Communications System Design Suite and information about how to get started with application development.
Visit ni.com/manuals for the most recent revisions of documentation.
Note To view PDFs, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/reader.
NI automates LabVIEW Communications System Design Suite and LabVIEW Communications 802.11 Application Framework installation using NI Package Manager. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual at ni.com/manuals, for more information about installing, removing, and upgrading NI software using NI Package Manager.
To find your application framework in NI Package Manager, select the Add-Ons product category in the Browse Products tab.
To download an installer for offline use, visit ni.com/info and enter the Info Code 80211APPFW to access the installation files download page for the LabVIEW Communications 802.11 Application Framework.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
© 2018–2019 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.