November 2015
This file contains important information about NI InsightCM™ Data Explorer, including installation instructions and access to known issues.
NI Application Software Support
Product Security and Critical Updates
Automating the Installation of NI Products
NI InsightCM Data Explorer provides interactive visualization and analysis of live and historical data to maintenance and equipment specialists. This software is designed to run on a desktop computer or laptop and connect to NI InsightCM Server to remotely access data stored on the server.
NI InsightCM Data Explorer has the following minimum requirements:
NI InsightCM Data Explorer has the following network requirements:
The following table lists the NI application software versions, including service packs, supported by NI InsightCM Data Explorer.
| NI Application Software | Versions Supported by Data Explorer |
|---|---|
| NI InsightCM Server | 2.0 |
Complete the following steps to install the NI InsightCM Data Explorer software:
| Note Visit ni.com/info and enter the Info Code USBGuideSpec for the USB flash drive user guide and specifications. |
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
NI InsightCM Data Explorer 2.0 includes an add-on, NI InsightCM Motor Monitoring System Toolkit, for you to view and analyze motor measurement data.
You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in NI InsightCM Data Explorer.
Refer to the NI InsightCM Data Explorer Help, accessible from Data Explorer by clicking Help»Contents, for information about the Data Explorer software. This help system is also accessible from the Windows Start menu.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
Copyright
© 2014-2015 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
374892B-01