March 2018
This file contains important information about NI-Embedded CAN for RIO, including software requirements, new features, supported hardware, and known issues.
Product Security and Critical Updates
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
The NI-Embedded CAN for RIO software provides support for the embedded CAN ports on RIO to transmit and receive CAN frames.
The NI-Embedded CAN for RIO software supports the following development environments:
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
Refer to Supported Hardware for NI-Embedded CAN for RIO for the latest information about the hardware that each version of the NI-Embedded CAN for RIO software supports.
If you use the single-board RIO hardware, the CAN Stop VI stops communication and discards CAN frames in the transmit and receive queues. If you use the CompactRIO with the built-in CAN port hardware, the CAN Stop VI stops communication and saves the CAN frames. After you restart communication by using the CAN Start VI, the NI-Embedded CAN for RIO software sends or receives the CAN frames in the transmit and receive queues.
You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in the NI-Embedded CAN for RIO software.
Refer to the NI-Embedded CAN for RIO Help, accessible by selecting Help»NI-Embedded CAN for RIO Help from LabVIEW, for information about the NI-Embedded CAN for RIO software.
Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the NI-Embedded CAN for RIO software are in the labview\examples\NI-Embedded CAN for RIO folder. You can modify an example VI to fit an application or copy an example and paste the example to a VI you create.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, NI Measurement & Automation Explorer (MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Copyright
© 2011–2018 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
374785F-01