Windows 10 (32-bit and 64-bit)
Windows 8.1 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista Business edition, Service Pack (SP) 1 or greater (32-bit and 64-bit)
Windows XP, SP3 or greater (32-bit)
Windows Server 2003 R2, SP2 or greater (32-bit)
Windows Server 2008 R2, SP1 or greater (64-bit, not supported on Server Core Role)
Windows Server 2012 R2 (64-bit)

Note Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.

Caution If you plan to perform an upgrade of your system from a prior version of Microsoft Windows to Microsoft Windows Vista, you are required to uninstall all NI software prior to performing the upgrade. After the upgrade has been completed, you can reinstall your NI software.

To find and download an earlier version of NI-DAQmx that supports other operating systems, refer to ni.com/downloads.

NI-DAQmx does not support guest accounts on Windows 7/Vista/XP. You must log into an administrative or user account to use NI-DAQmx on these OSes.

System Requirements

System Use	RAM	Processor
Development	1 GB	Pentium IV or later
Deployment	256 MB	Pentium III/Celeron 600 MHz or Equivalent

Application Software Support

The following table lists the application software versions supported by NI-DAQmx. If you are not using application software, refer to Microsoft Visual Studio Support.

Application Software	Versions Supported by NI-DAQmx and the DAQ Assistant
LabVIEW	2012, 2013, 2014, and 2015
LabVIEW Real-Time Module	2012, 2013, 2014, and 2015
LabWindows/CVI	9.0, 2009, 2010, 2012, 2013, and 2015
LabWindows/CVI Real-Time Module	9.0, 2009, 2010, 2012, 2013, and 2015
Measurement Studio	2010, 2012, 2013, and 2015
SignalExpress	2012, 2013, 2014, and 2015

Microsoft Visual Studio Support

The following table lists the programming languages and Microsoft Visual Studio versions supported by this version of NI-DAQmx. Earlier versions of NI-DAQmx support other application software and language versions.

Programming Language	Visual Studio Versions Supported by NI-DAQmx
ANSI C	2003, 2005, 2008, 2010, and 2012
.NET Framework 4.0 Languages (Visual C# .NET and Visual Basic .NET)	2010
.NET Framework 4.5 Languages (Visual C# .NET and Visual Basic .NET)	2012
.NET Framework 4.5.1 Languages (Visual C# .NET and Visual Basic .NET)	2013

For information on Visual Studio compatibility with earlier versions of NI-DAQmx, refer to ni.com/info and enter the info code NETlegacydrivers. To find and download an earlier version of a driver, refer to ni.com/downloads.

Support for 64-bit applications is available in NI-DAQmx 9.2.3 and later for Visual Studio 2010 support, NI-DAQmx 9.6.2 and later for Visual Studio 2012 support, and NI-DAQmx 14.5 and later for Visual Studio 2013.

For information on examples that use NI-DAQmx and Measurement Studio, refer to Where To Find Examples in the NI Measurement Studio Help.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

New Features

Added support for the PXIe-4340 SC Express device
Added support for the 9230 (BNC), 9232 (BNC), NI 9251, and 9436 C Series devices
Added support for the PXIe-6378 device
Added support for the RM-4302 and RM-4304 SC Express accessories
Added support for .NET memory-optimized synchronous and asynchronous read operations when performing multiple reads with a continuous digital input task

Driver Version Naming Changes

NI-DAQmx versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions now start with a two-digit year indicator: <ProductName><Year-BasedVersion>. For example, NI-DAQmx 14.0 is the version released with LabVIEW 2014. The last version released under the old numbering scheme is NI-DAQmx 9.9. The first version released under the new numbering scheme is NI-DAQmx 14.0.

Device Support in NI-DAQmx

The following lists detail the devices supported in NI-DAQmx. Device support is divided into the following categories:

Devices Supported in NI-DAQmx
Devices Not Supported in NI-DAQmx on the 64-Bit Versions of Windows 8.1/7/Vista

For MXI-3 and MXI-4 OS-specific support information, refer to KB 45MA9LF7, Is MXI-3 Supported In Windows Vista or Windows 7?.

Devices Supported in NI-DAQmx

The following lists detail the devices supported in NI-DAQmx. Device support is divided into the following categories:

Note In the device support tables that follow, a ✓ indicates that the device is supported, a blank cell indicates that the device either does not exist or is not supported in NI-DAQmx, and an X indicates that the device is no longer supported in NI-DAQmx.

For MXI-3 and MXI-4 OS-specific support information, refer to KB 45MA9LF7, Is MXI-3 Supported In Windows Vista or Windows 7?.

X Series DAQ

The following X Series DAQ devices are supported:

Device	PCIe	PXIe	USB
NI 6320	✓
NI 6321	✓
NI 6323	✓
NI 6341	✓	✓	✓
NI 6343	✓		✓
NI 6345		✓
NI 6351	✓		✓
NI 6353	✓		✓
NI 6355		✓
NI 6356		✓	✓
NI 6358		✓
NI 6361	✓	✓	✓
NI 6363	✓	✓	✓
NI 6365		✓
NI 6366		✓	✓
NI 6368		✓
NI 6375		✓
NI 6378		✓

M Series DAQ

The following M Series DAQ devices are supported:

Device	PCI	PCIe	PXI	PXIe	USB
NI 6210/11/12/15/16/18					✓
NI 6220	✓		✓
NI 6221	✓		✓		✓
NI 6224	✓		✓
NI 6225	✓		✓		✓
NI 6229	✓		✓		✓
NI 6230/32/33/36/38/39	✓		✓
NI 6250	✓		✓
NI 6251	✓	✓	✓	✓	✓
NI 6254	✓		✓
NI 6255	✓		✓		✓
NI 6259	✓	✓	✓	✓	✓
NI 6280	✓		✓
NI 6281	✓		✓		✓
NI 6284	✓		✓
NI 6289	✓		✓		✓

E Series DAQ

The following E Series DAQ devices are supported.

Device	PCMCIA	PCI	PXI
NI 6023E		✓
NI 6024E^*	✓	✓
NI 6025E		✓	✓
NI 6030E			✓
NI 6031E		✓	✓
NI 6032E/33E/34E/35E		✓
NI 6036E^*	✓	✓
NI 6040E			✓
NI 6052E		✓	✓
NI 6062E^*	✓
NI 6070E			✓
NI 6071E		✓	✓
NI PCI-MIO-16E-1		✓
NI PCI-MIO-16E-4		✓
NI PCI-MIO-16XE-10	X	✓
NI PCI-MIO-16XE-50	X	✓
* PCMCIA versions are not supported on 64-bit versions of Windows 8.1/7/Vista

S Series DAQ

The following S Series DAQ devices are supported:

Device	PCI	PXI	PXIe
NI 6110	✓
NI 6111	✓
NI 6115	✓	✓
NI 6120	✓	✓
NI 6122	✓	✓
NI 6123	✓	✓
NI 6124			✓
NI 6132	✓	✓
NI 6133	✓	✓
NI 6143	✓	✓
NI 6154	✓

SC Express

The following SC Express devices are supported:

Device	PXIe
NI 4300	✓
NI 4302	✓
NI 4303	✓
NI 4304	✓
NI 4305	✓
NI 4322	✓
NI 4330	✓
NI 4331	✓
NI 4339	✓
NI 4340	✓
NI 4353	✓
NI 4357	✓

SC Express Accessories

The following SC Express terminal blocks and other accessories are supported:

Device	Supported Accessory
NI 4300	NI TB-4300, NI TB 4300B, NI TB-4300C, NI CAL-4300B
NI 4302	NI RM-4302, NI TB-4302, NI TB-4302C
NI 4303	NI TB-4302, NI TB-4302C
NI 4304	NI RM-4304, NI TB-4304
NI 4305	NI TB-4304
NI 4322	NI TB-4322
NI 4330	NI TB-4330
NI 4339	NI TB-4339, NI TB-4339B, NI TB-4339C, NI RM-4339
NI 4353	NI TB-4353, NI TC-4353, NI CAL-4353
NI 4357	NI TB-4357

C Series, Network DAQ, and USB DAQ

The following C Series, Network DAQ, and USB DAQ devices are supported:

Device	CompactDAQ Chassis^*	Legacy Chassis and Carriers
Device	CompactDAQ Chassis^*	NI ENET/WLS-9163	NI USB-9162	NI cDAQ-9172
NI 9201	✓		✓	✓
NI 9203	✓			✓
NI 9205	✓	✓		✓
NI 9206	✓	✓		✓
NI 9207	✓			✓
NI 9208	✓			✓
NI 9209	✓
NI 9211^†	✓	✓	✓	✓
NI 9212	✓
NI 9213	✓	✓	✓	✓
NI 9214	✓
NI 9215^†	✓	✓	✓	✓
NI 9216	✓
NI 9217	✓			✓
NI 9218	✓
NI 9219	✓	✓	✓	✓
NI 9220	✓
NI 9221	✓		✓	✓
NI 9222	✓
NI 9223	✓
NI 9225	✓			✓
NI 9226	✓
NI 9227	✓			✓
NI 9229	✓		✓	✓
NI 9230	✓
NI 9232	✓
NI 9233	✓		✓	✓
NI 9234	✓	✓	✓	✓
NI 9235	✓			✓
NI 9236	✓			✓
NI 9237	✓	✓	✓	✓
NI 9237 (DSUB)	✓			✓
NI 9238	✓
NI 9239	✓		✓	✓
NI 9242	✓
NI 9244	✓
NI 9246	✓
NI 9247	✓
NI 9251	✓		✓	✓
NI 9260	✓
NI 9263	✓		✓	✓
NI 9264	✓		✓	✓
NI 9265	✓		✓	✓
NI 9269	✓			✓
NI 9344	✓
NI 9361	✓
NI 9375	✓
NI 9401	✓			✓
NI 9402	✓			✓
NI 9403	✓			✓
NI 9411	✓			✓
NI 9421	✓	✓	✓	✓
NI 9422	✓			✓
NI 9423	✓			✓
NI 9425	✓			✓
NI 9426	✓			✓
NI 9435	✓			✓
NI 9436	✓
NI 9437	✓
NI 9469	✓
NI 9472	✓	✓	✓	✓
NI 9474	✓			✓
NI 9475	✓			✓
NI 9476	✓			✓
NI 9477	✓			✓
NI 9478	✓			✓
NI 9481	✓	✓	✓	✓
NI 9482	✓
NI 9485	✓			✓
* Does not include the NI cDAQ-9172.
† The NI USB-9211A and NI USB-9215A (C Series modules with a bundled NI USB-9162) are supported in NI-DAQmx. The NI USB-9211 and NI USB-9215 (C Series modules with a bundled NI USB-9161) are not supported in NI-DAQmx.

CompactDAQ Chassis

The following CompactDAQ chassis are supported:

CompactDAQ Chassis	Ethernet	USB	Wireless
NI cDAQ-9171^*		✓
NI cDAQ-9172		✓
NI cDAQ-9174^*		✓
NI cDAQ-9178^*		✓
NI cDAQ-9179‡		✓
NI cDAQ-9181	✓
NI cDAQ-9184	✓
NI cDAQ-9188	✓
NI cDAQ-9188XT	✓
NI cDAQ-9191	✓		✓
* Support for this chassis was added in the LabVIEW Real-Time Module 2012. Refer to CompactDAQ Controllers for additional version compatibility.
‡ This device does not support Windows XP or Phar Lap.

CompactDAQ Controllers

The following CompactDAQ controllers are supported:

CompactDAQ Chassis	WES7	Real Time
NI cDAQ-9132^*	✓	✓
NI cDAQ-9133^*	✓	✓
NI cDAQ-9134^*	✓	✓
NI cDAQ-9135^*	✓	✓
NI cDAQ-9136^‡	✓	✓
NI cDAQ-9137^‡	✓	✓
NI cDAQ-9138^†	✓	✓
NI cDAQ-9139^†	✓	✓
* Real-time support for this controller was added in the LabVIEW Real-Time Module 2014.
‡ Real-time support for this controller was added in the LabVIEW Real-Time Module 2015.
† Real-time support for this controller was added in the LabVIEW Real-Time Module 2012.

AO Series

The following AO Series devices are supported:

Device	DAQCard	PCI	PXI	PXIe
NI 6703		✓
NI 6704		✓	✓
NI 6711		✓	✓
NI 6713		✓	✓
NI 6715^*	✓
NI 6722		✓	✓
NI 6723		✓	✓
NI 6731		✓
NI 6733		✓	✓
NI 6738				✓
NI 6739				✓
* Not supported on 64-bit versions of Windows 8.1/7/Vista

Digital I/O

The following digital I/O devices are supported.

Device	DAQCard	PCI	PCIe	PXI	PXIe	USB
NI 6501						✓
NI 6503		✓
NI 6508				✓
NI 6509		✓	✓	✓		✓
NI 6510		✓
NI 6511		✓		✓
NI 6512		✓		✓
NI 6513		✓		✓
NI 6514		✓		✓
NI 6515		✓		✓
NI 6516		✓
NI 6517		✓
NI 6518		✓
NI 6519		✓
NI 6520		✓		✓
NI 6521		✓		✓
NI 6525						✓
NI 6527		✓		✓
NI 6528		✓		✓
NI 6529				✓
NI 6533	X	✓		✓
NI 6534		✓		✓
NI 6535			✓		✓
NI 6535B			✓
NI 6536			✓		✓
NI 6536B			✓
NI 6537			✓		✓
NI 6537B			✓
NI DIO-24^*	✓
NI DIO-32HS		✓
NI DIO-96		✓
* Not supported on 64-bit versions of Windows 8.1/7/Vista

TIO Series

The following TIO series devices are supported:

Device	PCI	PCIe	PXI	PXIe
NI 6601	✓
NI 6602	✓		✓
NI 6608			✓
NI 6612		✓		✓
NI 6614				✓
NI 6624	✓		✓

Dynamic Signal Acquisition (DSA)

The following DSA devices are supported:

Device	PCI	PXI	PXIe	USB
NI 4431				✓
NI 4432				✓
NI 4461	✓	✓
NI 4462	✓	✓
NI 4463			✓
NI 4464			✓
NI 4472/B	✓	✓
NI 4474	✓
NI 4492			✓
NI 4495		✓
NI 4496		✓	✓
NI 4497			✓
NI 4498		✓	✓
NI 4499			✓
NI 4610			✓

SC Series DAQ

The following SC Series DAQ devices are supported:

Device	PXI
NI 4200	✓
NI 4204	✓
NI 4220	✓
NI 4224	✓

Switches

Note As of NI-DAQmx 14.5, the NI-DAQmx Switch API is obsolete and is no longer recommended for new applications. For more information, refer to ni.com/info and enter the info code switchdriverconsiderations.

The following switches are supported:

Device	PCI	PXI	PXIe
NI 4021	✓	✓
NI 2501		✓
NI 2503		✓
NI 2510		✓
NI 2512		✓	✓
NI 2514		✓	✓
NI 2515		✓	✓
NI 2520		✓
NI 2521		✓
NI 2522		✓
NI 2523		✓
NI 2527		✓	✓
NI 2529		✓	✓
NI 2530		✓
NI 2531		✓	✓
NI 2532		✓	✓
NI 2533		✓
NI 2534		✓
NI 2535		✓
NI 2536		✓
NI 2540		✓	✓
NI 2541		✓	✓
NI 2542		✓	✓
NI 2543		✓	✓
NI 2544		✓	✓
NI 2545		✓
NI 2546		✓
NI 2547		✓
NI 2548		✓
NI 2549		✓
NI 2554		✓
NI 2555		✓
NI 2556		✓
NI 2557		✓
NI 2558		✓
NI 2559		✓
NI 2564		✓
NI 2565		✓
NI 2566		✓
NI 2567		✓
NI 2568		✓
NI 2569		✓	✓
NI 2570		✓
NI 2571		✓
NI 2575		✓	✓
NI 2576		✓
NI 2584		✓
NI 2585		✓
NI 2586		✓
NI 2590		✓
NI 2591		✓
NI 2593		✓	✓
NI 2594		✓
NI 2595		✓
NI 2596		✓
NI 2597		✓
NI 2598		✓
NI 2599		✓
NI 2720		✓
NI 2722		✓
NI 2725			✓
NI 2727			✓
NI 2800		✓
NI 2790			✓
NI 2796		✓
NI 2797		✓
NI 2798		✓
NI 2799		✓
NI 2810		✓
NI 2811		✓
NI 2812		✓
NI 2813		✓
NI 2814		✓
NI 2815		✓
NI 2816		✓
NI 2817		✓
NI 2833		✓
NI 2834		✓
NI 2865		✓

SCXI Chassis

The following SCXI Chassis are supported:

NI PXI-1010
NI PXI-1011
NI PXI-1050
NI PXI-1052
NI SCXI-1000/DC
NI SCXI-1001

SCXI Modules

The following SCXI modules are supported:

NI SCXI-1100
NI SCXI-1102
NI SCXI-1102B/C
NI SCXI-1104/C
NI SCXI-1112
NI SCXI-1120/D
NI SCXI-1121
NI SCXI-1122
NI SCXI-1124
NI SCXI-1125
NI SCXI-1126
NI SCXI-1127
NI SCXI-1128
NI SCXI-1129
NI SCXI-1130
NI SCXI-1140
NI SCXI-1141
NI SCXI-1142
NI SCXI-1143
NI SCXI-1160
NI SCXI-1161
NI SCXI-1162
NI SCXI-1162HV
NI SCXI-1163
NI SCXI-1163R
NI SCXI-1166
NI SCXI-1167
NI SCXI-1169
NI SCXI-1175
NI SCXI-1190
NI SCXI-1191
NI SCXI-1192
NI SCXI-1193
NI SCXI-1194
NI SCXI-1195
NI SCXI-1314T
NI SCXI-1502
NI SCXI-1503
NI SCXI-1520
NI SCXI-1521/B
NI SCXI-1530
NI SCXI-1531
NI SCXI-1540
NI SCXI-1581
NI SCXI-1600 (Not supported on 64-bit versions of Windows 8.1/7/Vista)

TEDS Interface

The following TEDS devices are supported:

NI SC-2350
NI BNC-2096
NI SCXI-1314T

Academic Devices

The following academic devices are supported:

NI ELVIS II
NI ELVIS II+
NI myDAQ

Legacy DAQ Devices

The following legacy DAQ devices (also called B Series devices) are supported:

Device	DAQ Pad	PCI	USB
NI DAQPad-6015^*	✓
NI DAQPad-6016^*	✓
NI PCI-6010		✓
NI PCI-6013		✓
NI PCI-6014		✓
SensorDAQ			✓
* Not supported on 64-bit versions of Windows 8.1/7/Vista

Low-Cost USB

The following low-cost USB devices (also called B Series devices) are supported:

Device	USB
NI 6000	✓
NI 6001	✓
NI 6002	✓
NI 6003	✓
NI 6008	✓
NI 6009	✓
NI TC01	✓

Devices Not Supported in NI-DAQmx on the 64-Bit Versions of Windows 8.1/7/Vista

The following devices are supported in NI-DAQmx on the 32-bit versions of Windows 8.1/7/Vista. They are not supported on the 64-bit versions of Windows 8.1/7/Vista:

NI DAQCard-6024E 200 kS/s, 12-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI DAQCard-6036E 200 kS/s, 16-bit, 16 analog input channel, two analog output channel, 8 digital I/O line, two counter/timer device
NI DAQCard-6062E 500 kS/s, 12-bit, 16 analog input channel device
NI DAQCard-6715 for PCMCIA 1 MS/s 12-bit analog output device
NI DAQCard-DIO-24 for PCMCIA 24-channel 5V/TTL/CMOS digital I/O device
NI DAQPad-6015 for USB
NI DAQPad-6015 for USB (BNC)
NI DAQPad-6015 for USB (Mass Termination)
NI DAQPad-6016 for USB
NI SCXI-1600 USB module

Important Notice: Microsoft Hotfix for USB DAQ Devices and Windows XP

If you are using NI-DAQmx with a USB DAQ device on Windows XP, you should install the Microsoft hotfix reported in Microsoft Knowledge Base 969238.

Refer to previous NI-DAQmx readmes, available on ni.com/drivers, for issues fixed in earlier versions of NI-DAQmx.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in NI-DAQmx.

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed in NI-DAQmx 15.5. This is not an exhaustive list of issues fixed in the current version of the NI-DAQmx 15.5. If you have a CAR ID, you can search this list to validate that the issue has been fixed.

CAR ID	Summary
520554	Possible system crash in niraptrk.dll when rapidly creating and destroying tasks on X Series and other STC3-based devices
537489	Formerly present NI SwitchBlock Matrix Cards cannot be properly removed in the MAX configuration
547031	cDAQ-9171 does not show up under NI Linux RT targets (cDAQ, cRIO, or CVS) in MAX
549088	Internal error (-225224) when using more than 16 HW-timed AO channels on Gen II Compact DAQ chassis
552922	For C Series modules, PFI line inputs specified in tasks and global virtual channels in MAX revert to default lines when the task/channel is used in LabVIEW
553004	After calling the DAQmx Start New File VI, the next call to DAQmx Read returns waveform data in which t0 and dt are incorrect
562298	Configuring E Series with an accessory causes test panels to fail in MAX with Error -88302: "an internal error has occurrred"
562948	In rare cases, the last byte of a TEDS bit stream might be not be written to the EEPROM
563864	On myDAQ, using both analog outputs on different voltage ranges could result in improperly scaled data
564919	CVI executables built in NI-DAQmx 14.5 or 15.0 do not execute in NI-DAQmx 15.1 or NI-DAQmx 15.1.1

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.1. You can launch MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8.1 Desktop	Desktop Taskbar	Right-click application and select Pin to taskbar
Windows 8.1 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8.1 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, click the down arrow on the bottom left of the screen.

For more information about NI support for Windows 8.1, visit ni.com/windows8.

NI-DAQmx Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

NI-DAQmx will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI-DAQmx that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

Product	Info Code
LabVIEW	lifecycle
LabWindows™/CVI™	cvi_lifecycle
Measurement Studio	mstudiolifecycle
TestStand	tslcp
DIAdem	ddlcp
SignalExpress	selcp
VeriStand	nivslifecycle

Legal Information

Copyright

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

Notices are located in the <National Instruments>\_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>\Shared\MDF\Legal\license directory.
Review <National Instruments>\_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

374768H-01