LabVIEW 2016 FPGA Module Xilinx Compilation Tools for Linux Readme

June 2016


This file contains important information about the LabVIEW FPGA Module Xilinx Compilation Tools for Linux, including system requirements and installation instructions.


Overview

System Requirements

Supported Hardware

Installation Instructions

Product Security and Critical Updates

Legal Information


Overview

The Xilinx compilation tools include tools for Vivado 2015.4 and ISE 14.7, which are supported by the LabVIEW FPGA Module. Install these compilation tools if you want to compile FPGA VIs on a Linux computer.


The Xilinx compilation tools also support Windows. Refer to the FPGA Module Xilinx Compilation Tools for Windows Readme for more information.


System Requirements

The Xilinx Compilation Tool for Vivado 2015.4 has the following system requirements:


  • Red Hat Enterprise Linux 6.5 (64-bit) or 7.0, or CentOS 7.0
  • 10 GB of additional disk space

The Xilinx Compilation Tool for ISE 14.7 has the following system requirements:


  • Red Hat Enterprise Linux 6.5 (64-bit)
  • 11 GB of additional disk space

Supported Hardware

The following sections contain the NI hardware supported by the FPGA Module Xilinx Compilation Tools on Linux:


Xilinx Compilation Tool for Vivado 2015.4

Use the Xilinx Compilation Tool for Vivado 2015.4 to compile FPGA VIs for the following devices:


  • IC-317x
  • NI 9147, NI 9149
  • NI cRIO-903x, NI cRIO-906x
  • NI PXIe-517xR, NI PXIe-5624R, NI PXIe-5820R, NI PXIe-5840R, NI PXIe-659xR, NI PXIe-782xR, NI PXIe-793xR, NI PXIe-797xR, NI PXIe-7902R
  • NI sbRIO-9651, NI sbRIO-9607, NI sbRIO-9627, NI sbRIO-9637
  • NI USB-784xR, NI USB-785xR
  • NI USRP-RIO 294x, NI USRP-RIO 295x

Xilinx Compilation Tool for ISE 14.7

Use the Xilinx Compilation Tool for ISE 14.7 to compile FPGA VIs for the following devices:


  • NI 9144, NI 9146, NI 9148, NI 915x
  • NI cRIO-907x, NI cRIO-908x, NI cRIO-911x
  • NI PCIe-784xR, NI PCIe-785xR, NI PCIe-1473R
  • NI PXI-784xR, NI PXI-785xR, NI PXI-795xR
  • NI PXIe-796xR, NI PXIe-564xR
  • NI sbRIO-9605, NI sbRIO-9606, NI sbRIO-961x, NI sbRIO-962x, NI sbRIO-963x, NI sbRIO-964x

Visit ni.com/info and enter the Info Code XilinxCompileTools for more information about the NI hardware supported by each Xilinx compilation tool.


Installation Instructions

Complete the following steps to install the FPGA Module Xilinx Compilation Tools for Linux:


  1. Log into the system as root.
  2. Use mount to mount the compilation tools installer.
  3. Change the current directory to the mount point.
  4. To run the installation script, enter sh ./INSTALL.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.



Legal Information

Copyright


© 2012–2016 National Instruments. All rights reserved.


Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.


National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.


Third-Party Copyright Notices


The SharpZipLib_Notice.pdf file contains a third-party copyright notice for third-party components used by certain FPGA Module features. The following directory is the default installation location for the file, but the location might vary depending on the configuration of the local computer:

/usr/local/natinst/nifpgacompileworker/doc


End-User License Agreements and Third-Party Legal Notices


You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

/usr/local/natinst/nifpgacompileworker/doc


U.S. Government Restricted Rights


If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.


IVI Foundation Copyright Notice


Content from the IVI specifications reproduced with permission from the IVI Foundation.


The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.


Trademarks


Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.


Patents


For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


374740F-01