This document outlines the NI Developer Suite Core and Add-On Components. Products either new or updated for this NI Developer Suite edition are noted in bold.
Note: To install your NI Developer Suite products, insert DVD 1 and follow the instructions.
|National Instruments Product||Version|
|LabVIEW Professional Development System||2014 SP1|
|LabWindows™/CVI™ Full Development System||2013 SP2|
|Measurement Studio Enterprise Edition||2013|
|Advanced Signal Processing Toolkit||2014|
|Digital Filter Design Toolkit||2014|
|DataFinder Toolkit||2014 SP1|
|Unit Test Framework||2014|
|Desktop Execution Trace Toolkit||2014|
|VI Analyzer Toolkit||2014|
|Execution Profiler Toolkit||1.0|
|PID Control Toolkit||2.1|
|Signal Processing Toolkit||7.0.2|
Note: You can find the driver software for some options, such as the Image Acquisition and Machine Vision Option's Vision Acquisition Software, on the NI Device Drivers media.
|NI Developer Suite Add-on Option||Add-on Option Components||Version|
|Automated Test Option||TestStand Development System 32-bit||2014|
|TestStand Development System 64-bit||2014|
|NI Switch Executive||3.6|
|Circuit Prototyping Option||NI Circuit Design Suite (NI Multisim Full, NI Ultiboard Full)||13.0.1|
|Communications Option||LabVIEW Modulation Toolkit||4.4|
|LabVIEW Spectral Measurements Toolkit||2.7|
|LabWindows/CVI Spectral Measurements Toolkit||2.7|
|LabWindows/CVI Modulation Toolkit||4.1|
|Control Design and Simulation Option||LabVIEW Control Design and Simulation Module||2014|
|Data Management Option||DIAdem Professional||2014 SP1|
|FPGA Deployment Option||LabVIEW FPGA Module||2014 SP1|
|Image Acquisition and Machine Vision Option||Vision Development Module||2014 SP1|
|Vision Builder for Automated Inspection||2014|
|Vision Builder for Automated Inspection Development Kit||2014|
|Industrial Monitoring Option||LabVIEW Datalogging and Supervisory Control Module||2014|
|LabVIEW Real-Time Deployment Option||LabVIEW Real-Time Module||2014 SP1|
|LabWindows/CVI Real-Time Deployment Option||LabWindows/CVI Real-Time Module||2013 SP1|
|MathScript RT Option||LabVIEW MathScript RT Module||2014|
|Motion Control Option||LabVIEW SoftMotion Module Premium||2014 SP1|
|Real-Time Testing and HIL Simulation Option||VeriStand*||2014|
|Requirements Management Option||Requirements Gateway||2014|
|Sound and Vibration Option||Sound and Vibration Measurement Suite||2014|
|Statechart Option||LabVIEW Statechart Module||2014|
|* Download the latest version of VeriStand from ni.com/downloads.|
For a list of the device driver software versions included in this release and other important information, refer to the readme on the NI Device Drivers media or visit ni.com/info and enter the Info Code driversFeb2015. For a list of the RF driver software versions included in this release, refer to the readme on the NI RF Driver Suite media or visit ni.com/info and enter the Info Code RFDriversFeb2015.
© 2014–2015 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments.
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.