This document outlines the NI Developer Suite Core and Add-On Components. Products either new or updated for this NI Developer Suite edition are noted in bold.
Note: To install your NI Developer Suite products, insert DVD 1 and follow the instructions.
| National Instruments Product | Version |
| LabVIEW Professional Development System | 2013 SP1 |
| NI SignalExpress | 2013 |
| LabWindows™/CVI™ Full Development System | 2013 SP1 |
| Measurement Studio Enterprise Edition | 2013 |
| LabVIEW Toolkits | |
| Database Connectivity Toolkit | 2013 |
| Report Generation for Microsoft Office Toolkit | 2013 |
| Advanced Signal Processing Toolkit | 2013 |
| Digital Filter Design Toolkit | 2013 |
| PID and Fuzzy Logic Toolkit | 2013 |
| DataFinder Toolkit | 2013 |
| Unit Test Framework | 2013 |
| Desktop Execution Trace Toolkit | 2013 |
| VI Analyzer Toolkit | 2013 |
| LabWindows/CVI Toolkits | |
| Execution Profiler Toolkit | 1.0 |
| PID Control Toolkit | 2.1 |
| Signal Processing Toolkit | 7.0.2 |
| SQL Toolkit | 2.2 |
Note: You can find the driver software for some options, such as the Image Acquisition and Machine Vision Option's Vision Acquisition Software, on the NI Device Drivers media.
| NI Developer Suite Add-on Option | Add-on Option Components | Version |
| Automated Test Option | TestStand Development System NI Switch Executive | 2013 3.6 |
| Circuit Prototyping Option | NI Circuit Design Suite (NI Multisim Full, NI Ultiboard Full) | 13.0 |
| Communications Option | LabVIEW Modulation Toolkit LabVIEW Spectral Measurements Toolkit LabWindows/CVI Spectral Measurements Toolkit LabWindows/CVI Modulation Toolkit | 4.3.4 2.6.4 2.6.4 4.1 |
| Control Design and Simulation Option | LabVIEW Control Design and Simulation Module LabVIEW System Identification Toolkit | 2013 2013 |
| Data Management Option | DIAdem Professional | 2012 SP1 |
| FPGA Deployment Option | LabVIEW FPGA Module | 2013 SP1 |
| Image Acquisition and Machine Vision Option | Vision Development Module Vision Builder for Automated Inspection Vision Builder for Automated Inspection Development Kit | 2013 SP1 2013 2013 |
| Industrial Monitoring Option | LabVIEW Datalogging and Supervisory Control Module | 2013 SP1 |
| LabVIEW Real-Time Deployment Option | LabVIEW Real-Time Module NI Real-Time Execution Trace Toolkit | 2013 SP1 2.0.6 |
| LabWindows/CVI Real-Time Deployment Option | LabWindows/CVI Real-Time Module NI Real-Time Execution Trace Toolkit | 2013 2.0.6 |
| MathScript RT Option | LabVIEW MathScript RT Module | 2013 |
| Motion Control Option | LabVIEW SoftMotion Module Premium NI Motion Assistant | 2013 SP1 2013 |
| Real-Time Testing and HIL Simulation Option | VeriStand | 2013 SP1 |
| Requirements Management Option | Requirements Gateway | 2012 |
| Sound and Vibration Option | Sound and Vibration Measurement Suite | 2013 |
| Statechart Option | LabVIEW Statechart Module | 2013 |
| Touch Panel Deployment Option | LabVIEW Touch Panel Module | 2013 |
For a list of the device driver software versions included in this release and other important information, refer to the readme on the NI Device Drivers media or visit ni.com/info and enter the Info Code driverFeb2014.
Copyright
© 2014 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.