From 8:00 PM Friday, July 23 - 7:00 PM CDT Saturday, July 24, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

NI-RFmx 2.1 f4 Critical Update Patch Details

Overview

This article describes the fixes included in the NI-RFmx 2.1 f4 Critical Update.

Introduction

The following fixes were made in RFmx 2.1 f4 (patch) relative to RFmx 2.1

  • Crashes when memory usage in a process increases beyond 2 GB.
  • Recommended IQ Pre-trigger Time now returns a positive number instead of a negative number. This property is used when using RFmx in Analysis-Only mode.
  • For Analysis-Only mode, user needs to adjust t0 of the IQ waveforms according to pre-trigger samples present in the waveform before passing the waveform to Analyze(IQ) function. Refer to the LabVIEW code snippet in Figure 1 for more details. This behavior change affects C/.NET RFmx API as well.

 

Figure 1. Behavior Changes for RFmx 2.1 Analysis-Only Mode