The following items are known issues in the Sound and Vibration Toolkit and the Sound and Vibration Measurement Suite.
||The integration filter introduces unexpected phase shift.
||Shaft centerline plot xcontrol clears labview undo chain.
||SV Assistant crashes if shaft centerline plot history length is set to infinite.
||Spectral map step in SV Assistant may display gaps in properly formatted data sets.
||OAT spectral map does not return errors or warnings if it can not calculate data.
||OAT Even Time or Speed Segment.vi returns incorrect result if start and end input values are swapped.
||No error is reported if a Nyquist violation exists when generating tones with the discrete swept-sine code.
||Uninstalling SV 2013 should not remove SV Assistant if SV 2011 and/or SV 2012 still have a dependency on it.
||Extract Single Tone (complex) returns inconsistent frequency if advanced span is set to a very wide value.
||Ball spin frequency is calculated incorrectly in SVT Rolling-Element Bearing.vi.
||In UFF 58, record 9: ordinate data characteristics are written incorrectly for acceleration channels. instead of "acceleration," "time" is written to fields 1 and 5.
||Spectrum with cursors XControl always displays Hanning window.
© 2012 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
For patents covering the National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or ni.com/patents.