NI-568x 1.2 Known Issues

Overview

This document contains the NI-568x 1.2 known issues that were discovered before and since the release of NI-568x 1.2. Not every issue known to NI appears on this list; it is intended to show the most severe and common issues that can be encountered.

Each issue appears as a row in the table and includes the following fields:

  • Issue ID - The number in at the top of each of the cells in the first column. When you report an issue to NI, you may be given this ID, you can also find IDs posted by NI on the discussion forums or in Knowledge Base articles.  "N/A" indicates that there is no ID assigned to the issue.
  • Issue Title (in italics) - Describes the issue in one sentence or less.
  • Problem Description - A few sentences which describe the problem in further detail. The brief description given does not necessarily describe the problem in full detail, and it is expected that you may want more information on an issue. If you would like more information on an issue, contact NI and reference the ID number given in the document.
  • Workaround - Possible ways to work around the problem. The workarounds that appear in the document are not always tested by NI and are not guaranteed to resolve the issue. If a workaround refers you to the NI KnowledgeBase, visit www.ni.com/kb/ and enter the KnowledgeBase number in the search field to locate the specific document.
  • Reported Version - The earliest version of NI-568x in which the issue was reported. If you discover the issue appears in an earlier version of NI-568x than is reported in this field, report the discrepancy to NI to have the field updated.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).

Known Issues

218656 An error can occur after disconnecting and reconnecting NI USB-5681.
238457 Power meters do not appear in NI Measurement & Automation Explorer (MAX) after installing the NI-568x driver.
240557 The Scope mode acquisition example returns an error when you use a small capture time.
258340 Closing a session to an NI 568x device takes a long time if the device is still waiting on trigger.
412196 Disconnecting an NI 5681 device while a measurement is in progress causes unexpected behavior.
412319 In Windows 8, an error occurs when you attempt to initialize the NI 568x device with high memory addressing enabled.
413281 When the computer wakes from standby mode, the NI-568x Soft Front Panel crashes.
411345 When you reconnect the power meter with the NI-568x SFP, the device cannot be connected to



ID Known Issue
218656

An error can occur after disconnecting and reconnecting NI USB-5681.
Occasionally when you disconnect the power meter and reconnect it to the same port the Initialize with Options VI fails with error - 1073807298.

Workaround: Choose from the following workarounds:

  • Connect the power meter to a different port. 
  • Close LabVIEW and the Soft Front Panel (any applications using the power meter), disconnect the power meter, pause, and reconnect the device.

Reported Version: 1.1    Resolved Version: N/A    Added: 09/28/2010
238457

Power meters do not appear in NI Measurement & Automation Explorer (MAX) after installing the NI-568x driver.
NI-568x 1.1 and later added support for displaying the USB power meters in MAX. However, if a power meter was connected to the system during NI-568x driver installation, the power meter does not appear in MAX.

Workaround: To display the power meter in MAX, disconnect and reconnect the power meter after a pause.

Reported Version: 1.1    Resolved Version: N/A    Added: 09/28/2010
240557

The Scope mode acquisition example returns an error when you use a small capture time.
NI-568x returns error 1074118649 when you enable a gate, but gate parameters are not within the limits of the capture time. This issue is not limited to the example VI. For NI-568x 1.2, an error occurs only when the capture time is set to less than 1.37ms.

Workaround: When you unable a gate, set gate parameters as follows:

  • Gate start must be positive.
  • Gate end must be greater than gate start.
  • Gate start and gate end must both be less than the capture time.
Reported Version: 1.1    Resolved Version: N/A    Added: 09/28/2010
258340

Closing a session to an NI 568x device takes a long time if the device is still waiting on a trigger.
If you attempt to close a session to the NI 568x device while the device is waiting to receive a trigger, the call to close can take up to 2 minutes to execute.
Workaround: Send the trigger before closing the session.

Reported Version: 1.1    Resolved Version: N/A    Added: 11/16/2010
412196

Disconnecting an NI 5681 device while a measurement is in progress causes unexpected behavior.
When you disconnect the NI 5681 while it is executing a measurement operation, such as averaging, subsequent calls to the Is Measurement Complete VI/function returns measurement status unknown without an error. If Is Measurement Complete is called within a loop, the code could hang because it is waiting for measurement complete or an error to be returned. In LabVIEW, if you abort the VI after encountering this issue, initialization will take a long time to run and returns error -1073807345, even after you reconnect the device.
Workaround: Abort the executing code and reconnect the device to a different USB port.

Reported Version: 1.2    Resolved Version: N/A    Added: 06/10/2013
412319

In Windows 8, an error occurs when you attempt to initialize the NI 568x device with high memory addressing enabled.
In Windows 8, the following error occurs when you attempt to initialize the NI 568x device with high memory addressing enabled: ni568x Initialize With Options.vi ni568x Initialize With Options.vi Driver Status: (Hex 0xBFFA0060) COM4

Workaround: Disable high memory addressing in Windows 8 systems.

Reported Version: 1.2    Resolved Version: N/A    Added: 06/10/2013
413281

When the computer wakes from standby mode, the NI-568x Soft Front Panel (SFP) crashes.
If you put the computer on standby with the NI-568x SFP open, when you wake the computer, the SFP crashes.
Workaround: Close the SFP and any other application that has an open session to a power meter before going into standby mode.

Reported Version: 1.2    Resolved Version: N/A    Added: 06/17/2013
411345

When you reconnect the power meter with the NI-568x SFP, the device cannot be connected to
When you disconnect and then reconnect the power meter with the NI-568x SFP before the SFP can release the handle (before "No Sensor" is displayed), the device enters a state in which it cannot be connected either through the SFP or any other development environment. When you attempt to open a session to the device, the system returns an error of BFFF0011 (-1073807343).

Workaround: The two workarounds for this issue are as follows: 1) If the device was running at the time of disconnection, wait until "No Sensor" is shown in the SFP when you unplug the device from the system. 2) Unplug and then reconnect the device to the system while the SFP is running. This causes the SFP to reconnect properly to the device and to continue with normal operation.

Reported Version: 1.2    Resolved Version: N/A    Added: 09/17/2013

Contacting NI

Contact NI regarding this document or issues in the document. If you contact NI in regards to a specific issue, reference the ID number given in the document. The ID number contains the current issue ID number as well as the legacy ID number (use the current ID number when contacting NI). You can contact us through any of the normal support channels including phone, email, or the discussion forums. Visit the NI Website to contact us. Also contact us if you find a workaround for an issue that is not listed in the document.

Glossary of Terms

 

  • Bug ID - When an issue is reported to NI, you may be given this ID or find it on ni.com.  You may also find IDs posted by NI on the discussion forums or in KnowledgeBase articles.
  • Legacy ID – An older issue ID that refers to the same issue.  You may instead find this issue ID in older known issues documents.
  • Description - A few sentences which describe the problem. The brief description given does not necessarily describe the problem in full detail.
  • Workaround - Possible ways to work around the problem.
  • Reported Version - The earliest version in which the issue was reported.
  • Resolved Version - Version in which the issue was resolved or was no longer applicable. "N/A" indicates that the issue has not been resolved.
  • Date Added - The date the issue was added to the document (not the reported date).