Home Soporte Documentación Compatibilidad

Archived: NI-Industrial Communications for DNP3 and LabVIEW Compatibility

Updated Feb 4, 2020

National Instruments does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Visión General



This page shows supported versions of the NI-Industrial Communications for DNP3 hardware driver with LabVIEW development systems. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabVIEW palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).

Note that this article replaces KnowledgeBase 5YEER05R: NI-Industrial Communications for DNP3 and LabVIEW Version Compatibility. Some NI manuals may still reference the previous document. If you were redirected from the previous KnowledgeBase URL, please update your bookmarks accordingly.

NI-Industrial Communications for DNP3 and LabVIEW Compatibility

Use this table to compare NI-Industrial Communications for DNP3 and LabVIEW Compatibility
NI-IndCom for DNP3 Version LabVIEW Version
2009 2010 2011  2012   2013 2014 2015 2016 2017
1.0                  
1.1                  
2.0                  
2.1                  
14.0                  

 

  Compatible


 

Note: The LabVIEW versions are expressed in 32 bit architecture


 

Back to top

Additional Resources

Back to top