CompactRIO Third-Party Products Complete Overview List
Overview
CompactRIO features a powerful heterogeneous computing architecture along with customizable IO using C Series modules in a small, rugged form factor. In order to extend the C Series module offering even further to meet industry specific needs or requirements, the module development kit (MDK) allows third party developers to create custom modules. Below you will find qualified CompactRIO modules with ready-made hardware and driver software. If your application requires a custom I/O module with unique or specialized signal types, contact one of these suppliers and they will design a module to your exact needs.
The following list is intended as an overview of products and does not contain any device specifications. If looking for the device specifications, please see the appropriate third party website.
Contents
- Featured Third-Party Modules
- Communications Modules
- Bus Communications Modules
- C Series Digital Modules
- Display Modules
- Vehicle Design Modules
- Sensor Interface and Protocol Modules
- Sensor Simulation
- Switches
- Motion Modules
- Processor Modules
- 19-in Enclosures and Accessories
- NI Partners and CompactRIO Modules
- Additional Resources
Featured Third-Party Modules
See the new Precision Filters PFI-9602 and PFI-9608 Programmable Filter Analog I/O Module
Communications Modules
- S.E.A. SEA 9406 Multi GNSS High Precision Module
- S.E.A. SEA 9715 Ethernet Switch Module
- S.E.A. SEA 9719 802.11 Communication Module
- UNO-LUX NS d.o.o SRB cRIO GSM (SMS delivery report, CSD, TCP/UDP up to 8 connections, TCP server)
Bus Communications Modules
- S.E.A. SEA 9510 EnDat Interface Module
- S.E.A. SEA 9521 BiSS Interface Module
- S.E.A. SEA 9811 ARINC 429 Interface Module
- Bloomy BCI-1553 MIL-STD-1553B C-Series Module
C Series Digital Modules
- ANGARA Technology AT-2501-M Optical Trigger Distribution Module
- ANGARA Technology AT-2502 Variable Power Fibre Module
Display Modules
- S.E.A.SEA 4912 cRIO Display 2.4” Kit
- S.E.A. SEA 4914 cRIO Display 4.3” Kit
Vehicle Design Modules
- Wireflow WF 3168 Battery Stack Monitor and Balancing Module
- Wireflow WF 3169 Battery Stack Monitor Module
Sensor Interface and Protocol Modules
- Precision Filters PFI-9608 Programmable Filter Analog I/O Module
- Precision Filters PFI-9102 Bridge Conditioner for Pressure/Strain/Vibration/Load Measurements
- Precision Filters PFI-9302 Charge Conditioner for Piezoelectric Sensor Measurements
- Precision Filters PFI-9452 Dynamic Strain Conditioner with Balance Constant Current Technology™
- Precision Filters PFI-9602 Anti-Aliasing Amplifier/Filter with Optional IEPE Current Source
- CGS CGS ISRM - SENT (Intelligent Sensor Read Module)
- S.E.A. SEA 9510 EnDat Module (digital encoder interface)
- S.E.A. SEA 9521 BiSS Interface Module
Sensor Simulation
- Wireflow WF 3144 C Series, Resistor Emulator Module
Switches
- S.E.A. SEA 9715 Ethernet Switch Module
- WireFlow WF 3132 C Series, Multiplexer Switch Module
- WireFlow WF 3154 C Series, Fault Injection Module
Motion Modules
- CCM 2282 Stepper Motor Driver and Analyzer Modules
- CCM 2283 Stepper Motor Driver and Analyzer Modules
- DSM VF-90 Linear Piezo Amplifier Module
- Robotronix RX-XY2-100 Communication Module
- SISU Devices SISU-1004, 4-Axis Stepper Drive Interface Module
- S.E.A. SEA 9510 EnDat Module (digital encoder interface)
- S.E.A. SEA 9521 BiSS Interface Module
Processor Modules
- Bluetechnix ADI Blackfin 537 Processor Modules
- Bluetechnix ADI Blackfin 537 with integrated JTAG Debug Processor Modules
19-in Enclosures and Accessories
- BiRA 19" Rack-Mount Enclosure for CompactRIO
- BiRA CompactRIO Connector Breakout and Interface Boards
NI Partners and CompactRIO Modules
NI works with NI Partners who create many of the modules listed on this page. These NI Partners also often have special skills and expertise in working with CompactRIO systems.