R Series Multifunction RIO Driver and LabVIEW Version Compatibility
Overview
Starting with LabVIEW 2015, the NI-RIO device driver split into three separate installers: CompactRIO Device Drivers (supports CompactRIO and Single-Board RIO), R Series Multifunction (supports R Series cards), and FlexRIO (supports FlexRIO boards).
This page shows supported versions of R Series Multifunction RIO Driver with LabVIEW development systems. Reference this information and Software Support for R Series Hardware to ensure that you install the correct driver version when upgrading or updating your system or software. Using incompatible versions may result in errors, or missing palettes or functions.
Note: For information about NI driver and development software compatibility after version 21.5, please refer to NI Driver and Development Software Compatibility.
R Series Multifunction RIO and LabVIEW Compatibility
In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.
| R Series Multifunction RIO | LabVIEW Version | |||||||
|---|---|---|---|---|---|---|---|---|
| 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | |
| 21.5 | ||||||||
| 21.3 | ||||||||
| 20.7 | ||||||||
| 20.0 | ||||||||
| 19.6 | ||||||||
| 19.1 | ||||||||
| 19.0 | ||||||||
| 18.5 | ||||||||
| 18.0 | ||||||||
| 17.0.1 | ||||||||
| 17.0 | ||||||||
Compatible with Base Only
Compatible with SP1 and Base
