TestStand Compatibility with LabVIEW and LabWindows™/CVI™

Overview

This page shows supported versions of NI TestStand with LabVIEW and LabWindows/CVI. Reference this information to ensure you install the correct version when upgrading or updating your software version, or when migrating or porting code to a new system. Using incompatible versions may result in errors, the inability to run LabVIEW VIs from TestStand, or unexpected behaviors.

Contents

NI TestStand with LabVIEW Compatibility Table

In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.

 

Use this table to compare versions of NI TestStand to compatible versions of LabVIEW in mainstream support.
TestStand VersionLabVIEW Version
2023 Q32023 Q12022 Q32021 SP120212020 SP120202019 SP120192018 SP1
2023 Q4   
2022 Q4   
2021 SP1   
2021    
2020      
2019        
2017 SP1         

 

Note: A version of TestStand supports any versions of LabVIEW and LabWindows/CVI that are in Current Release Support and Mainstream Support when the version of TestStand is launched. Additionally, each version of TestStand also typically supports versions of LabVIEW and LabWindows/CVI that are released while the version of TestStand is still in Current Release Support or Mainstream Support. If a maintenance release is available for a version of LabVIEW or LabWindows/CVI, TestStand will support only the maintenance release. Please reference each product’s maintenance policy for information on the policy for patching issues.

Compatible Version

NI TestStand with LabWindows/CVI Compatibility Table

In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.

 

Use this table to compare versions of NI TestStand to compatible versions of LabWindows/CVI
TestStand VersionLabWindows/CVI Version
2020201920172015 SP120152013 SP22013 SP120132012 SP12012
2023 Q4       
2022 Q4       
2021 SP1      
2021      
2020      
2019     
2017 SP1    
2017    
2016   
2014       
2013       

 

Note: A version of TestStand supports any versions of LabVIEW and LabWindows/CVI that are in Current Release Support and Mainstream Support when the version of TestStand is launched. Additionally, each version of TestStand also typically supports versions of LabVIEW and LabWindows/CVI that are released while the version of TestStand is still in Current Release Support or Mainstream Support. If a maintenance release is available for a version of LabVIEW or LabWindows/CVI, TestStand will support only the maintenance release. Please reference each product’s maintenance policy for information on the policy for patching issues.

Compatible Version

Compatible with 32-bit version only

Was this information helpful?

Yes

No