This guide is intended to cover connectors and cables for use with C Series Modules. It does not explicitly cover other NI product families such as DAQ Multifunction I/O, Digital Waveform Instruments (formerly HSDIO), or R Series. It also does not cover legacy or End of Life (EOL) parts or products. Additionally, these products are supported in cRIO and/or cDAQ chassis, but this guide does not cover chassis accessories.
Note: Using the page search functionality in your browser to locate your model may speed up this process. This is typically CTRL+F on Windows or ⌘+F on MacOS.
This page is arranged by first having you identify the connector type on your C Series Module, locating the information for your specific model, and then choosing the accessory or cable combination that best fits your needs.
How to identify the model number of your C Series Module:
The model number of the C Series Module is printed on the faceplate of the actual module and also in the Getting Started that ships with the module.
Figure 1: C Series with LEMO Terminal Front Connection
Note: N/A= Not Applicable
|NI-9218||NI 9982L, LEMO Screw Terminal Block
NI 9983L, LEMO Current Shunt Adapter 0-20mA P/N: 783412-01NI 9984L, 1/4 Bridge 120 Ohm
P/N: 783414-01NI 9985L, 1/4 Bridge 350 Ohm
P/N: 783416-01NI 9986L, 1/2 Bridge
P/N: 783418-01NI 9987L, LEMO 60 V Voltage Adapter
P/N: 783420-01LEMO Female to Pigtail I/O Cable, 1M
P/N: 158293-01LEMO Female to Pigtail I/O Cable, 2M
P/N: 158293-02LEMO Plug
|Extra Power Connectors for NI 9218 LEMO
2-Pos Micro-Fit Plug And Crimp Terminal Kit P/N: 783799-01
For more information on any of the listed NI orderable parts, please visit http://www.ni.com/contact-us/ to contact an NI representative. Most NI orderable parts listed in this guide without a product page can still be purchased by contacting NI.