ni.com is currently undergoing scheduled maintenance.
Some services may be unavailable at this time. Please contact us for help or try again later.
120 VAC Output Module for SSR—The SSR‑OAC5 uses a logic TTL signal from a data acquisition device to switch AC and DC loads in a manner similar to conventional relays. If the data acquisition device is sending a logic low, the SSR‑OAC5 is turned on and current can flow. If the device sends a logic high, the SSR‑OAC5 is turned off and current is stopped. Unlike conventional relays, the SSR‑OAC5 has zero voltage turn on of the load. Also, a load voltage and minimum current must be present to maintain the SSR‑OAC5 in the on state.