Verifying the Device Connection Using LabVIEW NXG or LabVIEW Communications System Design Suite 2.1 to Current

Use USRP Rx Continuous Async to confirm that the device receives signals and is connected correctly to the host computer.

  1. Navigate to Learning » Examples » Hardware Input and Output » NI-USRP » NI-USRP.
  2. Select Rx Continuous Async. Click Create.
  3. Run USRP Rx Continuous Async.
    If the device is receiving signals you will see data on the front panel graphs.
  4. Click STOP to conclude the test.