AMPM
- 更新时间2025-10-13
- 阅读时长1分钟
Groups
None
Group members
| Name | Description |
|---|---|
| RFmxSpecAn_AMPMCfgAMToAMCurveFit | Configures the degree of the polynomial and the cost-function for approximating the measured AM-to-AM response of the device under test. |
| RFmxSpecAn_AMPMCfgAMToPMCurveFit | Configures the degree of the polynomial and the cost-function, for approximating the measured AM-to-PM response of the device under test. |
| RFmxSpecAn_AMPMCfgAveraging | Configures averaging for the AMPM measurement. |
| RFmxSpecAn_AMPMCfgCompressionPoints | Configures the compression point computation. |
| RFmxSpecAn_AMPMCfgDUTAverageInputPower | Configures the average power, in dBm, of the signal at the input port of the device under test. |
| RFmxSpecAn_AMPMCfgMeasurementInterval | Configures the acquisition time, in seconds, for the AMPM measurement. |
| RFmxSpecAn_AMPMCfgMeasurementSampleRate | Configures the acquisition sample rate, in Samples per second (S/s), for the AMPM measurement. |
| RFmxSpecAn_AMPMCfgReferencePowerType | Configures the reference power to be used for AM to AM and AM to PM traces. |
| RFmxSpecAn_AMPMCfgReferenceWaveform | Configures the reference waveform and its attributes for the AMPM measurement. |
| RFmxSpecAn_AMPMCfgReferenceWaveformSplit | Configures the reference waveform and its attributes for the AMPM measurement. |
| RFmxSpecAn_AMPMCfgSynchronizationMethod | Configures the synchronization method used to synchronize the reference waveform and acquired waveform. |
| RFmxSpecAn_AMPMCfgThreshold | Configures the threshold level for the samples that need to be considered for the AMPM measurement. |
Attachments
None