FlexLogger - Channel VI下载PDF选定部分选定部分和子部分整个手册更新时间2025-11-20阅读时长3分钟FlexLoggerAPI参考LabVIEW G Get or Set channel information for the currently loaded project. Select an instance of this polymorphic VI to see more details. FlexLogger - Get Channel Names VIGet the list of Channel names for the currently loaded project. You can filter the list by configured channels, input and output channels, and analog and digital channels. By default, this VI returns all configured channels in the project.FlexLogger - Get Channel Data Rate Level VIGet the Data rate info for the specified Channel name. The Actual data rate may differ from the Data rate associated with the Data rate level if the hardware doesn't support the specified value. Only DAQ channels support data rate information. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Enabled VIGet the Enabled state for the specified Channel name. The enabled state indicates if the channel is enabled. No data is read from disabled channels. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Logging Enabled VIGet the logging state for the specified Channel name. The logging state indicates if the channel will be logged in the TDMS file. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Value VIGets the Value for the specified Channel name. For digital channels, a value of 0 indicates the channel is low and 1 indicates the channel is high. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Values VIGets the Values on the specified Channel names. For digital channels, a value of 0 indicates the channel is low and 1 indicates the channel is high. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Set Channel Data Rate Level VISet the Data rate level for the specified Channel name. There are three options for analog input channels (Slow, Medium, Fast). Counter and Digital Input channels only support a single data rate level. The OnDemand data rate level can include static digital channels and analog output channels. Only DAQ channels support data rate levels. Call the Get Channel Names instance of this VI to get a list of valid channel names. Call the Data Rate VI to get or set the date rate for the various data rate levels.FlexLogger - Set Channel Enabled VISets the Enabled state for the specified Channel name. When a channel is disabled (i.e. enabled is False), no data is acquired from that channel. Call the Get Channel Names instance of this VI to get a list of valid channel names. Note: Not all channels support setting the enabled state.FlexLogger - Set Channel Logging Enabled VISets the logging state for the specified Channel name. When logging is disabled (i.e. enabled is False), no data is logged to TDMS for that channel. Call the Get Channel Names instance of this VI to get a list of valid channel names. Note: Not all channels support setting the logging state.FlexLogger - Set Channel Value VISets the Value on the specified Channel name. For digital channels, specify 0 to set the channel low. Any other value will set the channel high. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Set Channel Values VISets the Values on the specified Channel names. For digital channels, specify 0 to set the channel low. Any other value will set the channel high. Call the Get Channel Names instance of this VI to get a list of valid channel names.Parent topic: Automation
Get or Set channel information for the currently loaded project. Select an instance of this polymorphic VI to see more details. FlexLogger - Get Channel Names VIGet the list of Channel names for the currently loaded project. You can filter the list by configured channels, input and output channels, and analog and digital channels. By default, this VI returns all configured channels in the project.FlexLogger - Get Channel Data Rate Level VIGet the Data rate info for the specified Channel name. The Actual data rate may differ from the Data rate associated with the Data rate level if the hardware doesn't support the specified value. Only DAQ channels support data rate information. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Enabled VIGet the Enabled state for the specified Channel name. The enabled state indicates if the channel is enabled. No data is read from disabled channels. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Logging Enabled VIGet the logging state for the specified Channel name. The logging state indicates if the channel will be logged in the TDMS file. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Value VIGets the Value for the specified Channel name. For digital channels, a value of 0 indicates the channel is low and 1 indicates the channel is high. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Values VIGets the Values on the specified Channel names. For digital channels, a value of 0 indicates the channel is low and 1 indicates the channel is high. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Set Channel Data Rate Level VISet the Data rate level for the specified Channel name. There are three options for analog input channels (Slow, Medium, Fast). Counter and Digital Input channels only support a single data rate level. The OnDemand data rate level can include static digital channels and analog output channels. Only DAQ channels support data rate levels. Call the Get Channel Names instance of this VI to get a list of valid channel names. Call the Data Rate VI to get or set the date rate for the various data rate levels.FlexLogger - Set Channel Enabled VISets the Enabled state for the specified Channel name. When a channel is disabled (i.e. enabled is False), no data is acquired from that channel. Call the Get Channel Names instance of this VI to get a list of valid channel names. Note: Not all channels support setting the enabled state.FlexLogger - Set Channel Logging Enabled VISets the logging state for the specified Channel name. When logging is disabled (i.e. enabled is False), no data is logged to TDMS for that channel. Call the Get Channel Names instance of this VI to get a list of valid channel names. Note: Not all channels support setting the logging state.FlexLogger - Set Channel Value VISets the Value on the specified Channel name. For digital channels, specify 0 to set the channel low. Any other value will set the channel high. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Set Channel Values VISets the Values on the specified Channel names. For digital channels, specify 0 to set the channel low. Any other value will set the channel high. Call the Get Channel Names instance of this VI to get a list of valid channel names.Parent topic: Automation
Get or Set channel information for the currently loaded project. Select an instance of this polymorphic VI to see more details. FlexLogger - Get Channel Names VIGet the list of Channel names for the currently loaded project. You can filter the list by configured channels, input and output channels, and analog and digital channels. By default, this VI returns all configured channels in the project.FlexLogger - Get Channel Data Rate Level VIGet the Data rate info for the specified Channel name. The Actual data rate may differ from the Data rate associated with the Data rate level if the hardware doesn't support the specified value. Only DAQ channels support data rate information. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Enabled VIGet the Enabled state for the specified Channel name. The enabled state indicates if the channel is enabled. No data is read from disabled channels. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Logging Enabled VIGet the logging state for the specified Channel name. The logging state indicates if the channel will be logged in the TDMS file. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Value VIGets the Value for the specified Channel name. For digital channels, a value of 0 indicates the channel is low and 1 indicates the channel is high. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Get Channel Values VIGets the Values on the specified Channel names. For digital channels, a value of 0 indicates the channel is low and 1 indicates the channel is high. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Set Channel Data Rate Level VISet the Data rate level for the specified Channel name. There are three options for analog input channels (Slow, Medium, Fast). Counter and Digital Input channels only support a single data rate level. The OnDemand data rate level can include static digital channels and analog output channels. Only DAQ channels support data rate levels. Call the Get Channel Names instance of this VI to get a list of valid channel names. Call the Data Rate VI to get or set the date rate for the various data rate levels.FlexLogger - Set Channel Enabled VISets the Enabled state for the specified Channel name. When a channel is disabled (i.e. enabled is False), no data is acquired from that channel. Call the Get Channel Names instance of this VI to get a list of valid channel names. Note: Not all channels support setting the enabled state.FlexLogger - Set Channel Logging Enabled VISets the logging state for the specified Channel name. When logging is disabled (i.e. enabled is False), no data is logged to TDMS for that channel. Call the Get Channel Names instance of this VI to get a list of valid channel names. Note: Not all channels support setting the logging state.FlexLogger - Set Channel Value VISets the Value on the specified Channel name. For digital channels, specify 0 to set the channel low. Any other value will set the channel high. Call the Get Channel Names instance of this VI to get a list of valid channel names.FlexLogger - Set Channel Values VISets the Values on the specified Channel names. For digital channels, specify 0 to set the channel low. Any other value will set the channel high. Call the Get Channel Names instance of this VI to get a list of valid channel names.Parent topic: Automation
