IM
- 업데이트 날짜:2025-10-13
- 1분 (읽기 시간)
Groups
None
Group members
| Name | Description |
|---|---|
| RFmxSpecAn_IMCfgAutoIntermodsSetup | Configures whether the measurement computes the intermod frequencies or uses manually specified frequencies. |
| RFmxSpecAn_IMCfgAveraging | Configures averaging for the IM measurement. |
| RFmxSpecAn_IMCfgFFT | Configures the window and FFT to obtain a spectrum for the IM measurement. |
| RFmxSpecAn_IMCfgFrequencyDefinition | Configures whether you can specify the tones and intermod frequencies as either relative to the RF center frequency or as absolute frequencies. |
| RFmxSpecAn_IMCfgFundamentalTones | Configures the upper and lower frequencies in a two-tone input signal. |
| RFmxSpecAn_IMCfgIntermod | Configures the intermod order, intermod side, lower intermod frequency, and upper intermod frequency when you set the RFMXSPECAN_ATTR_IM_AUTO_INTERMODS_SETUP_ENABLED attribute to False. |
| RFmxSpecAn_IMCfgIntermodArray | Configures the intermod order, intermod side, lower intermod frequency, and upper intermod frequency when you set the RFMXSPECAN_ATTR_IM_AUTO_INTERMODS_SETUP_ENABLED attribute to False. |
| RFmxSpecAn_IMCfgMeasurementMethod | Configures the method for performing the IM measurement. |
| RFmxSpecAn_IMCfgNumberOfIntermods | Configures the number of intermods to measure when you set the RFMXSPECAN_ATTR_IM_AUTO_INTERMODS_SETUP_ENABLED attribute to False. |
| RFmxSpecAn_IMCfgRBWFilter | Configures the RBW filter. |
| RFmxSpecAn_IMCfgSweepTime | Configures the sweep time. |
Attachments
None